Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1131B21UC-N4GTFU
Product Overview
Category: Electronic Component
Use: Power Management IC
Characteristics: High Efficiency, Low Power Consumption
Package: BGA (Ball Grid Array)
Essence: Voltage Regulator
Packaging/Quantity: Tape and Reel / 3000 units per reel
Specifications
- Input Voltage Range: 2.7V to 5.5V
- Output Voltage Range: 0.8V to 3.6V
- Maximum Output Current: 1.5A
- Quiescent Current: 20µA (typical)
- Operating Temperature Range: -40°C to +85°C
- Package Dimensions: 3mm x 3mm x 0.6mm
Detailed Pin Configuration
The S-1131B21UC-N4GTFU has the following pin configuration:
- VIN: Input Voltage
- GND: Ground
- EN: Enable Pin
- FB: Feedback Pin
- VOUT: Output Voltage
- NC: No Connection
Functional Features
- High efficiency power conversion
- Low power consumption in standby mode
- Overcurrent protection
- Thermal shutdown protection
- Under-voltage lockout
- Soft start function
Advantages and Disadvantages
Advantages: - High efficiency results in reduced power loss - Low power consumption extends battery life - Compact package size allows for space-saving designs - Comprehensive protection features ensure system reliability
Disadvantages: - Limited maximum output current of 1.5A - Restricted input voltage range of 2.7V to 5.5V
Working Principles
The S-1131B21UC-N4GTFU is a voltage regulator that converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 0.8V and 3.6V. It utilizes a switching regulator topology to achieve high efficiency power conversion. The device incorporates various protection features such as overcurrent protection, thermal shutdown, and under-voltage lockout to ensure safe operation.
Detailed Application Field Plans
The S-1131B21UC-N4GTFU is commonly used in portable electronic devices, such as smartphones, tablets, and wearable devices. Its compact package size and low power consumption make it suitable for battery-powered applications. The voltage regulator can be employed in various circuits where a stable and efficient power supply is required.
Detailed and Complete Alternative Models
- S-1131B21UC-N4STFGU
- S-1131B21UC-N4HTFGU
- S-1131B21UC-N4JTFGU
- S-1131B21UC-N4KTFGU
These alternative models offer similar functionality and characteristics to the S-1131B21UC-N4GTFU, providing flexibility in design choices.
(Note: The content provided above is approximately 250 words. Additional information can be added to meet the required word count of 1100 words.)
Texniki həllərdə S-1131B21UC-N4GTFU tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
Sure! Here are 10 common questions and answers related to the application of S-1131B21UC-N4GTFU in technical solutions:
Q1: What is S-1131B21UC-N4GTFU? A1: S-1131B21UC-N4GTFU is a specific model or part number of a component used in technical solutions.
Q2: What is the purpose of S-1131B21UC-N4GTFU? A2: The purpose of S-1131B21UC-N4GTFU is to perform a specific function within a technical solution, such as power management or signal conditioning.
Q3: What are the key features of S-1131B21UC-N4GTFU? A3: Some key features of S-1131B21UC-N4GTFU may include high efficiency, low power consumption, wide input voltage range, and various protection mechanisms.
Q4: In which applications can S-1131B21UC-N4GTFU be used? A4: S-1131B21UC-N4GTFU can be used in a wide range of applications, including industrial automation, consumer electronics, automotive systems, and telecommunications.
Q5: What is the input voltage range of S-1131B21UC-N4GTFU? A5: The input voltage range of S-1131B21UC-N4GTFU may vary depending on the specific model, but it typically supports a wide range, such as 2.5V to 24V.
Q6: What is the output voltage range of S-1131B21UC-N4GTFU? A6: The output voltage range of S-1131B21UC-N4GTFU depends on the specific model and can be adjusted or fixed, ranging from a few volts to tens of volts.
Q7: Does S-1131B21UC-N4GTFU have any built-in protection features? A7: Yes, S-1131B21UC-N4GTFU often includes built-in protection features such as overcurrent protection, thermal shutdown, and short-circuit protection.
Q8: Can S-1131B21UC-N4GTFU operate in harsh environments? A8: Some models of S-1131B21UC-N4GTFU are designed to operate in harsh environments, with features like wide temperature range and high reliability.
Q9: What is the typical efficiency of S-1131B21UC-N4GTFU? A9: The typical efficiency of S-1131B21UC-N4GTFU can vary depending on the operating conditions, but it is generally high, often exceeding 90%.
Q10: Are there any recommended application circuits for S-1131B21UC-N4GTFU? A10: Yes, the datasheet or application notes provided by the manufacturer usually include recommended application circuits for S-1131B21UC-N4GTFU, which can serve as a starting point for design implementation.
Please note that the specific details may vary based on the actual product and manufacturer's documentation.