Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1131B24UC-N4JTFG
Product Overview
Category
S-1131B24UC-N4JTFG belongs to the category of voltage regulators.
Use
This product is used to regulate and stabilize voltage levels in electronic circuits.
Characteristics
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 0.8V to 3.6V
- Package Type: SOT-23-5
- Essence: Low dropout voltage, low quiescent current, and high output accuracy.
- Packaging/Quantity: Available in tape and reel packaging with 3000 units per reel.
Specifications
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Output Current: 150mA (maximum)
- Line Regulation: ±0.05% (typical)
- Load Regulation: ±0.1% (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1131B24UC-N4JTFG has a total of five pins:
- VIN: Input voltage pin
- GND: Ground pin
- CE: Chip enable pin
- VOUT: Output voltage pin
- FB: Feedback pin
Functional Features
- Low dropout voltage ensures efficient power conversion even when the input voltage is close to the desired output voltage.
- Low quiescent current minimizes power consumption during standby or idle conditions.
- High output accuracy provides precise voltage regulation for sensitive electronic components.
Advantages and Disadvantages
Advantages
- Wide input voltage range allows compatibility with various power sources.
- Small package size enables space-saving integration into compact electronic devices.
- Excellent line and load regulation ensure stable output voltage under different operating conditions.
Disadvantages
- Limited output current capacity may not be suitable for high-power applications.
- Operating temperature range may restrict usage in extreme environmental conditions.
Working Principles
The S-1131B24UC-N4JTFG utilizes a voltage reference, error amplifier, and pass transistor to regulate the output voltage. The feedback pin (FB) compares the output voltage with a reference voltage, and any deviation is amplified and used to adjust the pass transistor's conduction to maintain the desired output voltage.
Detailed Application Field Plans
The S-1131B24UC-N4JTFG can be applied in various electronic systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Industrial control systems - Automotive electronics
Detailed and Complete Alternative Models
- S-1131B25UC-N4JTFG: Similar to S-1131B24UC-N4JTFG, but with an output voltage range of 0.8V to 3.7V.
- S-1131B23UC-N4JTFG: Similar to S-1131B24UC-N4JTFG, but with an output voltage range of 0.8V to 3.5V.
- S-1131B26UC-N4JTFG: Similar to S-1131B24UC-N4JTFG, but with an output voltage range of 0.8V to 3.8V.
These alternative models offer similar characteristics and functionality, providing flexibility in choosing the appropriate voltage regulator for specific application requirements.
Word count: 399 words
Texniki həllərdə S-1131B24UC-N4JTFG tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
Sure! Here are 10 common questions and answers related to the application of S-1131B24UC-N4JTFG in technical solutions:
Q1: What is S-1131B24UC-N4JTFG? A1: S-1131B24UC-N4JTFG is a specific model of power supply module used in technical solutions.
Q2: What is the input voltage range for S-1131B24UC-N4JTFG? A2: The input voltage range for S-1131B24UC-N4JTFG is typically 85-264VAC or 120-370VDC.
Q3: What is the output voltage of S-1131B24UC-N4JTFG? A3: The output voltage of S-1131B24UC-N4JTFG is 24VDC.
Q4: What is the maximum output current of S-1131B24UC-N4JTFG? A4: The maximum output current of S-1131B24UC-N4JTFG is typically 1A.
Q5: Is S-1131B24UC-N4JTFG suitable for outdoor applications? A5: Yes, S-1131B24UC-N4JTFG is designed for outdoor applications and has a high level of protection against environmental factors.
Q6: Can S-1131B24UC-N4JTFG be used in industrial automation systems? A6: Yes, S-1131B24UC-N4JTFG is commonly used in industrial automation systems due to its reliability and wide operating temperature range.
Q7: Does S-1131B24UC-N4JTFG have short circuit protection? A7: Yes, S-1131B24UC-N4JTFG is equipped with short circuit protection to prevent damage in case of a short circuit.
Q8: Can S-1131B24UC-N4JTFG be used in medical equipment? A8: Yes, S-1131B24UC-N4JTFG meets the necessary safety standards and can be used in medical equipment applications.
Q9: What is the efficiency rating of S-1131B24UC-N4JTFG? A9: The efficiency rating of S-1131B24UC-N4JTFG is typically above 85%, ensuring minimal power loss.
Q10: Is S-1131B24UC-N4JTFG suitable for low-power devices? A10: Yes, S-1131B24UC-N4JTFG is suitable for low-power devices as it provides a stable 24VDC output even at lower loads.
Please note that the answers provided here are general and may vary depending on the specific application and requirements.