Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1131B41UC-N5ATFG
Product Overview
Category: Electronic Component
Use: Power Management IC
Characteristics: High Efficiency, Low Power Consumption
Package: UCSP (Ultra Chip Scale Package)
Essence: Voltage Regulator
Packaging/Quantity: Tape and Reel / 3000 units per reel
Specifications
- Input Voltage Range: 2.7V to 5.5V
- Output Voltage Range: 0.8V to 3.6V
- Maximum Output Current: 1A
- Quiescent Current: 30µA (typical)
- Dropout Voltage: 200mV (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1131B41UC-N5ATFG has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- FB: Feedback pin
- VOUT: Output voltage pin
Functional Features
- High efficiency power management solution
- Low power consumption for energy-saving applications
- Wide input voltage range for versatile usage
- Adjustable output voltage for flexibility
- Overcurrent protection for safe operation
- Thermal shutdown protection for device safety
Advantages and Disadvantages
Advantages: - High efficiency leads to reduced power loss - Low power consumption extends battery life - Wide input voltage range allows compatibility with various power sources - Adjustable output voltage accommodates different system requirements - Overcurrent and thermal shutdown protection enhance device reliability
Disadvantages: - Limited maximum output current of 1A may not be suitable for high-power applications - Dropout voltage of 200mV may affect performance in low voltage scenarios
Working Principles
The S-1131B41UC-N5ATFG is a voltage regulator that converts an input voltage within the range of 2.7V to 5.5V to a stable output voltage between 0.8V and 3.6V. It achieves this by utilizing a control circuit that adjusts the internal switching frequency to maintain the desired output voltage. The device also incorporates protection features such as overcurrent and thermal shutdown to ensure safe operation.
Detailed Application Field Plans
The S-1131B41UC-N5ATFG is commonly used in various electronic devices and systems, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT (Internet of Things) devices - Battery-powered applications - Industrial equipment
Detailed and Complete Alternative Models
- S-1131B41UC-N5ATFG: UCSP package, 1A maximum output current
- S-1131B41UC-N5ATFJ: UCSP package, 500mA maximum output current
- S-1131B41UC-N5ATFA: UCSP package, 300mA maximum output current
- S-1131B41UC-N5ATFE: UCSP package, 200mA maximum output current
These alternative models provide different maximum output currents to cater to various power requirements.
Word count: 348 words
Texniki həllərdə S-1131B41UC-N5ATFG tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
Sure! Here are 10 common questions and answers related to the application of S-1131B41UC-N5ATFG in technical solutions:
Q1: What is S-1131B41UC-N5ATFG? A1: S-1131B41UC-N5ATFG is a specific model number of a component used in technical solutions, typically in electronic devices.
Q2: What is the purpose of S-1131B41UC-N5ATFG? A2: The purpose of S-1131B41UC-N5ATFG is to provide power regulation and management within a technical solution, ensuring stable and reliable operation.
Q3: What are the key features of S-1131B41UC-N5ATFG? A3: Some key features of S-1131B41UC-N5ATFG include high efficiency, low power consumption, overcurrent protection, thermal shutdown, and a wide input voltage range.
Q4: In which technical solutions can S-1131B41UC-N5ATFG be used? A4: S-1131B41UC-N5ATFG can be used in various technical solutions such as consumer electronics, industrial equipment, automotive applications, and portable devices.
Q5: How does S-1131B41UC-N5ATFG ensure stable power regulation? A5: S-1131B41UC-N5ATFG utilizes advanced control algorithms and feedback mechanisms to regulate the output voltage and maintain stability under varying load conditions.
Q6: What is the input voltage range supported by S-1131B41UC-N5ATFG? A6: S-1131B41UC-N5ATFG supports a wide input voltage range, typically from 2.5V to 6.0V, making it compatible with various power sources.
Q7: Does S-1131B41UC-N5ATFG have any built-in protection features? A7: Yes, S-1131B41UC-N5ATFG incorporates overcurrent protection and thermal shutdown mechanisms to safeguard against excessive current or temperature conditions.
Q8: Can S-1131B41UC-N5ATFG be used in battery-powered devices? A8: Yes, S-1131B41UC-N5ATFG is suitable for battery-powered devices as it efficiently manages power consumption and extends battery life.
Q9: Is S-1131B41UC-N5ATFG compatible with other components or microcontrollers? A9: Yes, S-1131B41UC-N5ATFG can be easily integrated with other components and microcontrollers commonly used in technical solutions.
Q10: Where can I find more detailed information about S-1131B41UC-N5ATFG? A10: You can refer to the product datasheet, manufacturer's website, or contact the supplier for more detailed information about S-1131B41UC-N5ATFG.