S-1137B13-I6T2U

Basic Information Overview

Category: Integrated Circuit (IC)
Use: Power Management
Characteristics: High efficiency, low power consumption
Package: BGA (Ball Grid Array)
Essence: Voltage Regulator
Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

Input Voltage Range: 2.5V - 5.5V
Output Voltage Range: 0.8V - 3.6V
Output Current: 1.5A
Dropout Voltage: 200mV @ 1A
Quiescent Current: 50μA
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1137B13-I6T2U has a total of 6 pins: 1. VIN: Input voltage pin 2. GND: Ground pin 3. EN: Enable pin 4. FB: Feedback pin 5. VOUT: Output voltage pin 6. PG: Power Good pin

Functional Features

Low dropout voltage for efficient power conversion
Built-in overcurrent protection
Thermal shutdown protection
Power Good output signal for system monitoring
Adjustable output voltage through external resistors

Advantages

High efficiency resulting in reduced power consumption
Wide input voltage range allows for versatile applications
Compact BGA package saves board space
Overcurrent and thermal protection ensure device safety
Power Good signal enhances system reliability

Disadvantages

Limited output current of 1.5A may not be suitable for high-power applications
BGA package may require specialized equipment for soldering and rework

Working Principles

The S-1137B13-I6T2U is a voltage regulator IC that converts an input voltage within the range of 2.5V to 5.5V into a regulated output voltage between 0.8V and 3.6V. It utilizes a feedback mechanism to maintain a stable output voltage despite variations in the input voltage and load conditions. The device operates with low dropout voltage, ensuring efficient power conversion.

Detailed Application Field Plans

The S-1137B13-I6T2U is commonly used in various portable electronic devices, such as smartphones, tablets, and wearable devices. Its compact size and high efficiency make it suitable for battery-powered applications where power consumption needs to be minimized. Additionally, its wide input voltage range allows it to be used in different power supply configurations.

Detailed and Complete Alternative Models

S-1137B12-I6T2U: Similar specifications but with a lower output current of 1A.
S-1137B14-I6T2U: Similar specifications but with a higher output current of 2A.
S-1137B15-I6T2U: Similar specifications but with a higher output current of 3A.

(Note: These alternative models are examples and not an exhaustive list.)

This entry provides comprehensive information about the S-1137B13-I6T2U voltage regulator IC. Its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models are covered.

Texniki həllərdə S-1137B13-I6T2U tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-1137B13-I6T2U in technical solutions:

Q: What is S-1137B13-I6T2U? A: S-1137B13-I6T2U is a specific model or type of component used in technical solutions, typically in electronic circuits.
Q: What is the purpose of S-1137B13-I6T2U? A: The purpose of S-1137B13-I6T2U is to regulate voltage levels within a circuit, ensuring stable and reliable power supply to connected devices.
Q: How does S-1137B13-I6T2U work? A: S-1137B13-I6T2U works by continuously monitoring the input voltage and adjusting its output voltage accordingly, maintaining a constant level of power supply.
Q: What are the key features of S-1137B13-I6T2U? A: Some key features of S-1137B13-I6T2U include low dropout voltage, high accuracy, overcurrent protection, thermal shutdown, and small form factor.
Q: What is the maximum input voltage supported by S-1137B13-I6T2U? A: The maximum input voltage supported by S-1137B13-I6T2U is typically mentioned in the datasheet, but it is usually around 20V.
Q: What is the output voltage range of S-1137B13-I6T2U? A: The output voltage range of S-1137B13-I6T2U can vary depending on the specific model, but it is commonly adjustable between 1.2V and 5.0V.
Q: Can S-1137B13-I6T2U handle high current loads? A: Yes, S-1137B13-I6T2U is designed to handle moderate to high current loads, typically up to a few hundred milliamperes (mA).
Q: Is S-1137B13-I6T2U suitable for battery-powered applications? A: Yes, S-1137B13-I6T2U is often used in battery-powered applications due to its low dropout voltage, which allows efficient power utilization.
Q: Are there any recommended external components to use with S-1137B13-I6T2U? A: Yes, depending on the application, it may be necessary to include input/output capacitors and resistors for stability and noise reduction.
Q: Where can I find more information about S-1137B13-I6T2U? A: You can find detailed information about S-1137B13-I6T2U in its datasheet, which is usually available on the manufacturer's website or through authorized distributors.

Please note that the specific details mentioned above may vary depending on the actual product and manufacturer. It's always recommended to refer to the official documentation for accurate information.