ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1137C17-I6T2U
Ətraflı Baxın Məlumat vərəqləri

S-1137C17-I6T2U

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics:
    • High efficiency voltage regulator
    • Low power consumption
    • Small form factor
  • Package: SOT-23-5
  • Essence: Voltage Regulator IC
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Output Current: Up to 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1137C17-I6T2U has a total of 5 pins arranged as follows:

```

| | --| |-- |____| ```

Pin Configuration: 1. VIN: Input Voltage 2. GND: Ground 3. EN: Enable Pin 4. VOUT: Output Voltage 5. NC: No Connection

Functional Features

  • High efficiency voltage regulation
  • Low dropout voltage for improved performance
  • Built-in overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Low quiescent current for reduced power consumption

Advantages and Disadvantages

Advantages: - High efficiency operation - Compact size - Wide input voltage range - Overcurrent and short-circuit protection

Disadvantages: - Limited output current capacity (up to 100mA) - Requires external components for stability

Working Principles

The S-1137C17-I6T2U is a voltage regulator IC that regulates the input voltage to a stable output voltage. It operates by comparing the output voltage with a reference voltage and adjusting the internal circuitry to maintain a constant output voltage, even when the input voltage or load conditions change.

Detailed Application Field Plans

The S-1137C17-I6T2U is commonly used in various applications where a stable voltage supply is required. Some of the typical application fields include: - Battery-powered devices - Portable electronic devices - IoT (Internet of Things) devices - Wearable devices - Consumer electronics

Detailed and Complete Alternative Models

  1. S-1137C18-I6T2U: Similar specifications but with higher output current capacity (up to 150mA).
  2. S-1137C16-I6T2U: Similar specifications but with lower dropout voltage (150mV typical).
  3. S-1137C19-I6T2U: Similar specifications but with wider input voltage range (2.0V to 6.5V).

These alternative models provide options based on specific requirements and can be considered as alternatives to the S-1137C17-I6T2U.

Word count: 305 words

Texniki həllərdə S-1137C17-I6T2U tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is S-1137C17-I6T2U?
    - S-1137C17-I6T2U is a high-performance technical material used in various applications.

  2. What are the key properties of S-1137C17-I6T2U?
    - S-1137C17-I6T2U exhibits excellent thermal conductivity, high tensile strength, and exceptional chemical resistance.

  3. How is S-1137C17-I6T2U typically used in technical solutions?
    - S-1137C17-I6T2U is commonly used in heat sinks, electronic components, and industrial machinery due to its superior performance.

  4. Can S-1137C17-I6T2U withstand high temperatures?
    - Yes, S-1137C17-I6T2U has a high thermal stability and can withstand elevated temperatures without degradation.

  5. Is S-1137C17-I6T2U suitable for use in corrosive environments?
    - Absolutely, S-1137C17-I6T2U is highly resistant to corrosion and can be used in harsh chemical environments.

  6. What are the manufacturing processes involved in producing S-1137C17-I6T2U?
    - S-1137C17-I6T2U is typically manufactured using advanced polymerization techniques and precision molding processes.

  7. Are there any specific safety considerations when handling S-1137C17-I6T2U?
    - It's important to follow standard safety protocols when handling S-1137C17-I6T2U, including wearing appropriate protective gear.

  8. Can S-1137C17-I6T2U be customized for specific technical applications?
    - Yes, S-1137C17-I6T2U can be tailored to meet specific requirements through formulation adjustments and custom molding.

  9. What are the comparative advantages of S-1137C17-I6T2U over other materials?
    - S-1137C17-I6T2U offers superior thermal conductivity and mechanical strength compared to many traditional materials.

  10. Where can S-1137C17-I6T2U be sourced for technical solutions?
    - S-1137C17-I6T2U can be sourced from authorized distributors and manufacturers specializing in high-performance materials.