ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1142BB0H-E6T2U
Ətraflı Baxın Məlumat vərəqləri

S-1142BB0H-E6T2U

Product Overview

Category

S-1142BB0H-E6T2U belongs to the category of voltage regulators.

Use

This product is used for regulating voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low power consumption
  • Compact size
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

The S-1142BB0H-E6T2U comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

The S-1142BB0H-E6T2U is typically packaged in reels and each reel contains 3000 units.

Specifications

  • Input Voltage Range: 2.5V - 6.5V
  • Output Voltage Range: 1.2V - 5.5V
  • Output Current: Up to 100mA
  • Quiescent Current: 20µA (typical)
  • Dropout Voltage: 200mV (typical)

Detailed Pin Configuration

The S-1142BB0H-E6T2U has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: The S-1142BB0H-E6T2U ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown protection: In case of excessive heat, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures reliable performance of electronic devices.
  • Low power consumption helps conserve energy.
  • Compact size allows for easy integration into various circuit designs.
  • Wide input voltage range makes it versatile for different applications.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

The S-1142BB0H-E6T2U operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any variations in the input voltage.

Detailed Application Field Plans

The S-1142BB0H-E6T2U finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

  1. S-1132BxxxAx-C4T2U: Similar voltage regulator with higher output current capability.
  2. S-1112BxxxAx-C4T2U: Voltage regulator with lower dropout voltage for more demanding applications.
  3. S-1172BxxxAx-C4T2U: Dual-output voltage regulator for systems requiring multiple regulated voltages.

These alternative models provide options with different specifications to suit specific application requirements.

Word count: 346 words

Texniki həllərdə S-1142BB0H-E6T2U tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-1142BB0H-E6T2U in technical solutions:

  1. Q: What is S-1142BB0H-E6T2U? A: S-1142BB0H-E6T2U is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of S-1142BB0H-E6T2U? A: The operating voltage range of S-1142BB0H-E6T2U is typically between 0.8V and 6.0V.

  3. Q: How does S-1142BB0H-E6T2U detect voltage levels? A: S-1142BB0H-E6T2U uses a built-in voltage reference and comparator to detect if the input voltage exceeds or falls below a certain threshold.

  4. Q: Can S-1142BB0H-E6T2U be used in battery-powered devices? A: Yes, S-1142BB0H-E6T2U can be used in battery-powered devices as it operates within a wide voltage range suitable for such applications.

  5. Q: What is the output configuration of S-1142BB0H-E6T2U? A: S-1142BB0H-E6T2U provides an open-drain output, which requires an external pull-up resistor to obtain a logic-level signal.

  6. Q: Is S-1142BB0H-E6T2U capable of providing overvoltage protection? A: No, S-1142BB0H-E6T2U is primarily a voltage detection IC and does not provide overvoltage protection. It only detects voltage levels.

  7. Q: Can S-1142BB0H-E6T2U be used in automotive applications? A: Yes, S-1142BB0H-E6T2U is suitable for automotive applications as it can operate within the required voltage range and withstand automotive environmental conditions.

  8. Q: What is the typical quiescent current consumption of S-1142BB0H-E6T2U? A: The typical quiescent current consumption of S-1142BB0H-E6T2U is very low, usually around 1.5µA, making it suitable for power-sensitive applications.

  9. Q: Does S-1142BB0H-E6T2U have any built-in hysteresis? A: Yes, S-1142BB0H-E6T2U has a built-in hysteresis of typically 100mV, which helps prevent false triggering due to voltage fluctuations or noise.

  10. Q: Can multiple S-1142BB0H-E6T2U devices be connected together? A: Yes, multiple S-1142BB0H-E6T2U devices can be connected together to monitor different voltage levels simultaneously, provided each device has its own input and pull-up resistor.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of S-1142BB0H-E6T2U.