ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1142C40H-E6T2U
Ətraflı Baxın Məlumat vərəqləri

S-1142C40H-E6T2U

Product Overview

Category

S-1142C40H-E6T2U belongs to the category of voltage regulators.

Use

This product is used for regulating voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low power consumption
  • Compact size
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

The S-1142C40H-E6T2U comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

The S-1142C40H-E6T2U is typically packaged in reels and each reel contains 3000 units.

Specifications

  • Input Voltage Range: 2.5V - 6.5V
  • Output Voltage: 4.0V ±1%
  • Output Current: Up to 200mA
  • Quiescent Current: 10µA (typical)
  • Dropout Voltage: 150mV (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1142C40H-E6T2U has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: The S-1142C40H-E6T2U ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device automatically shuts down when the output current exceeds the specified limit, protecting the circuit from damage.
  • Thermal shutdown protection: In case of excessive temperature, the regulator enters a thermal shutdown mode to prevent overheating.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures reliable performance of electronic devices.
  • Low power consumption helps conserve energy.
  • Compact size allows for easy integration into space-constrained designs.
  • Wide input voltage range makes it compatible with various power sources.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • The small package size may require additional care during soldering and handling.

Working Principles

The S-1142C40H-E6T2U operates based on a feedback control mechanism. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

The S-1142C40H-E6T2U finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

  1. S-1142C33H-E6T2U: Similar to S-1142C40H-E6T2U, but with an output voltage of 3.3V.
  2. S-1142C50H-E6T2U: Similar to S-1142C40H-E6T2U, but with an output voltage of 5.0V.
  3. S-1142C25H-E6T2U: Similar to S-1142C40H-E6T2U, but with an output voltage of 2.5V.

These alternative models provide similar functionality with different output voltage options to suit specific application requirements.

In conclusion, the S-1142C40H-E6T2U is a voltage regulator that offers high precision voltage regulation, low power consumption, and compact size. It provides stable voltage output for various electronic devices and offers overcurrent and thermal shutdown protection. While it has limitations in terms of output current capacity, it is a reliable choice for many applications in the electronics industry.

Texniki həllərdə S-1142C40H-E6T2U tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-1142C40H-E6T2U in technical solutions:

  1. Q: What is the S-1142C40H-E6T2U? A: The S-1142C40H-E6T2U is a voltage detector IC (integrated circuit) used for monitoring and detecting voltage levels in electronic circuits.

  2. Q: What is the operating voltage range of S-1142C40H-E6T2U? A: The operating voltage range of S-1142C40H-E6T2U is typically between 0.8V and 6.0V.

  3. Q: How does S-1142C40H-E6T2U detect voltage levels? A: S-1142C40H-E6T2U uses a built-in voltage reference and comparator to compare the input voltage with a preset threshold, triggering an output signal when the voltage crosses the threshold.

  4. Q: Can S-1142C40H-E6T2U be used in battery-powered applications? A: Yes, S-1142C40H-E6T2U is suitable for battery-powered applications as it has low power consumption and can operate within a wide voltage range.

  5. Q: What is the output configuration of S-1142C40H-E6T2U? A: S-1142C40H-E6T2U provides an open-drain output, which requires an external pull-up resistor to achieve a logic high level.

  6. Q: Is S-1142C40H-E6T2U suitable for overvoltage protection? A: No, S-1142C40H-E6T2U is primarily designed for undervoltage detection and does not provide overvoltage protection.

  7. Q: Can S-1142C40H-E6T2U be used in automotive applications? A: Yes, S-1142C40H-E6T2U is automotive-grade and can be used in various automotive systems such as power management, battery monitoring, and fault detection.

  8. Q: What is the typical response time of S-1142C40H-E6T2U? A: The typical response time of S-1142C40H-E6T2U is around 200 microseconds.

  9. Q: Does S-1142C40H-E6T2U have any built-in hysteresis? A: Yes, S-1142C40H-E6T2U has a built-in hysteresis of approximately 100mV, which helps to prevent output oscillation near the threshold voltage.

  10. Q: Can multiple S-1142C40H-E6T2U devices be connected in parallel? A: Yes, multiple S-1142C40H-E6T2U devices can be connected in parallel to monitor different voltage levels or provide redundancy in critical applications.

Please note that these answers are general and may vary depending on the specific application and requirements.