ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1142D30A-E6T2U

S-1142D30A-E6T2U

Product Overview

Category

S-1142D30A-E6T2U belongs to the category of voltage regulators.

Use

This product is used for regulating voltage in electronic circuits.

Characteristics

  • Package: The S-1142D30A-E6T2U comes in a compact surface-mount package.
  • Essence: It is a low-dropout voltage regulator with high accuracy and low power consumption.
  • Packaging/Quantity: The product is typically packaged in reels, with a quantity of 3000 units per reel.

Specifications

The specifications of the S-1142D30A-E6T2U voltage regulator are as follows:

  • Input Voltage Range: 2.5V - 6.5V
  • Output Voltage: 3.0V ±1%
  • Maximum Output Current: 150mA
  • Dropout Voltage: 160mV (typical)
  • Quiescent Current: 20µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1142D30A-E6T2U voltage regulator has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage: The S-1142D30A-E6T2U exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
  • High accuracy: With a ±1% output voltage tolerance, this voltage regulator provides precise voltage regulation.
  • Low power consumption: The quiescent current of only 20µA ensures minimal power loss during operation.

Advantages and Disadvantages

Advantages

  • Compact size and surface-mount package make it suitable for space-constrained applications.
  • High accuracy ensures reliable voltage regulation.
  • Low dropout voltage allows efficient operation even with low input voltages.

Disadvantages

  • Limited maximum output current of 150mA may not be sufficient for high-power applications.
  • Operating temperature range of -40°C to +85°C may restrict its use in extreme temperature environments.

Working Principles

The S-1142D30A-E6T2U voltage regulator operates by comparing the output voltage with a reference voltage. It adjusts the resistance within the regulator to maintain a stable output voltage, compensating for any fluctuations in the input voltage.

Detailed Application Field Plans

The S-1142D30A-E6T2U voltage regulator finds applications in various electronic devices and circuits, including:

  1. Battery-powered devices: It can regulate the voltage supplied to microcontrollers, sensors, and other components in portable electronics.
  2. Automotive electronics: The voltage regulator ensures stable power supply to various automotive systems, such as infotainment systems and control modules.
  3. Industrial automation: It is used in industrial control systems to regulate voltage for sensors, actuators, and communication modules.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the S-1142D30A-E6T2U voltage regulator are:

  1. S-1132B30-M5T1G
  2. MCP1700-3002E/TO
  3. LM1117IMPX-3.0/NOPB

These alternatives can be considered based on specific requirements and availability.

Word count: 400 words

Texniki həllərdə S-1142D30A-E6T2U tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-1142D30A-E6T2U in technical solutions:

  1. Q: What is the S-1142D30A-E6T2U? A: The S-1142D30A-E6T2U is a voltage detector IC (integrated circuit) that monitors the voltage level and provides an output signal when the voltage exceeds or falls below a certain threshold.

  2. Q: What is the operating voltage range of S-1142D30A-E6T2U? A: The operating voltage range of S-1142D30A-E6T2U is typically between 1.6V and 6.0V.

  3. Q: How does S-1142D30A-E6T2U detect voltage levels? A: S-1142D30A-E6T2U uses a built-in voltage reference and comparator to compare the input voltage with a preset threshold. When the voltage crosses the threshold, it triggers the output signal.

  4. Q: Can S-1142D30A-E6T2U be used for overvoltage protection? A: Yes, S-1142D30A-E6T2U can be used for overvoltage protection by setting the threshold voltage above the desired maximum voltage level.

  5. Q: Is S-1142D30A-E6T2U suitable for battery-powered applications? A: Yes, S-1142D30A-E6T2U is suitable for battery-powered applications as it has low power consumption and can operate within a wide voltage range.

  6. Q: Can S-1142D30A-E6T2U be used for undervoltage detection? A: Yes, S-1142D30A-E6T2U can be used for undervoltage detection by setting the threshold voltage below the desired minimum voltage level.

  7. Q: What is the output type of S-1142D30A-E6T2U? A: The S-1142D30A-E6T2U has an open-drain output, which requires an external pull-up resistor to provide a logic-level signal.

  8. Q: What is the typical response time of S-1142D30A-E6T2U? A: The typical response time of S-1142D30A-E6T2U is around 200 microseconds.

  9. Q: Can S-1142D30A-E6T2U be used in automotive applications? A: Yes, S-1142D30A-E6T2U is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.

  10. Q: Are there any additional features or protections provided by S-1142D30A-E6T2U? A: Yes, S-1142D30A-E6T2U includes features like hysteresis, reverse voltage protection, and thermal shutdown to enhance its performance and protect against potential issues.

Please note that these answers are general and may vary depending on the specific application and requirements.