ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1167B25-I6T2U
Ətraflı Baxın Məlumat vərəqləri

S-1167B25-I6T2U

Basic Information Overview

  • Category: Electronic Component
  • Use: Voltage Regulator
  • Characteristics: High Efficiency, Low Dropout Voltage
  • Package: SOT-23-5
  • Essence: Regulates voltage to a stable level
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V - 6.5V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50µA (typical)

Detailed Pin Configuration

The S-1167B25-I6T2U has a total of 5 pins: 1. VIN: Input Voltage Pin 2. GND: Ground Pin 3. EN: Enable Pin 4. FB: Feedback Pin 5. VOUT: Output Voltage Pin

Functional Features

  • Low dropout voltage ensures efficient power conversion.
  • Wide input voltage range allows for versatile applications.
  • Built-in overcurrent protection safeguards the circuit.
  • Thermal shutdown feature prevents overheating.

Advantages

  • High efficiency results in minimal power loss.
  • Compact SOT-23-5 package saves board space.
  • Low quiescent current prolongs battery life.
  • Stable output voltage ensures reliable performance.

Disadvantages

  • Limited maximum output current may restrict certain applications.
  • Dropout voltage may cause slight power dissipation.

Working Principles

The S-1167B25-I6T2U is a voltage regulator that maintains a stable output voltage regardless of fluctuations in the input voltage. It achieves this by comparing the feedback voltage with a reference voltage and adjusting the pass transistor accordingly. The enable pin allows for control of the regulator's operation.

Detailed Application Field Plans

The S-1167B25-I6T2U is commonly used in various electronic devices, including: 1. Mobile phones 2. Portable media players 3. Digital cameras 4. Wireless communication modules 5. Battery-powered devices

Detailed and Complete Alternative Models

  1. S-1167B33-I6T2U: Similar voltage regulator with a higher output voltage range (3.3V - 6.5V).
  2. S-1167B18-I6T2U: Similar voltage regulator with a lower output voltage range (1.8V - 5.5V).
  3. S-1167B12-I6T2U: Similar voltage regulator with a lower output voltage range (1.2V - 5.5V) and higher maximum output current (200mA).

Note: The above alternative models are suggestions and may not cover all available options.

This concludes the encyclopedia entry for the S-1167B25-I6T2U voltage regulator.

Texniki həllərdə S-1167B25-I6T2U tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-1167B25-I6T2U in technical solutions:

  1. Question: What is the purpose of S-1167B25-I6T2U in technical solutions?
    Answer: S-1167B25-I6T2U is a component used for power management and voltage regulation in various technical solutions.

  2. Question: What is the input voltage range supported by S-1167B25-I6T2U?
    Answer: The input voltage range supported by S-1167B25-I6T2U is typically between 2.5V and 6V.

  3. Question: What is the output voltage range provided by S-1167B25-I6T2U?
    Answer: S-1167B25-I6T2U provides a fixed output voltage of 3.3V.

  4. Question: Can S-1167B25-I6T2U handle high current loads?
    Answer: Yes, S-1167B25-I6T2U has a maximum output current rating of 1A, making it suitable for moderate to high current applications.

  5. Question: Is S-1167B25-I6T2U suitable for battery-powered devices?
    Answer: Yes, S-1167B25-I6T2U is designed to be highly efficient and can operate with low quiescent current, making it suitable for battery-powered devices.

  6. Question: Does S-1167B25-I6T2U have built-in protection features?
    Answer: Yes, S-1167B25-I6T2U includes overcurrent protection, thermal shutdown, and short-circuit protection to ensure safe operation.

  7. Question: Can S-1167B25-I6T2U be used in automotive applications?
    Answer: Yes, S-1167B25-I6T2U is designed to meet automotive-grade requirements and can be used in automotive applications.

  8. Question: What is the operating temperature range of S-1167B25-I6T2U?
    Answer: S-1167B25-I6T2U has an operating temperature range of -40°C to +85°C, allowing it to withstand a wide range of environmental conditions.

  9. Question: Does S-1167B25-I6T2U require any external components for operation?
    Answer: S-1167B25-I6T2U requires a few external capacitors for stability and filtering purposes, but no additional components are typically needed.

  10. Question: Is S-1167B25-I6T2U available in different package options?
    Answer: Yes, S-1167B25-I6T2U is available in various package options, including surface mount packages like SOT-23 and DFN, providing flexibility for different design requirements.

Please note that the specific details and answers may vary depending on the manufacturer's specifications and datasheet of S-1167B25-I6T2U.