ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1172B48-E6T1G
Ətraflı Baxın Məlumat vərəqləri

S-1172B48-E6T1G

Product Overview

Category

The S-1172B48-E6T1G belongs to the category of voltage regulators.

Use

It is used to regulate voltage in electronic circuits and devices.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 0.8V to 5.0V
  • Low Dropout Voltage: 160mV @ 150mA
  • Package Type: SOT-23-5
  • Low Power Consumption

Package

The S-1172B48-E6T1G is available in a SOT-23-5 package.

Essence

This voltage regulator provides stable and reliable voltage output for various electronic applications.

Packaging/Quantity

The product is typically packaged in reels with a quantity specified by the manufacturer.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 0.8V to 5.0V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 160mV @ 150mA
  • Operating Temperature Range: -40°C to 85°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

The S-1172B48-E6T1G has five pins arranged as follows: 1. VIN (Input Voltage) 2. GND (Ground) 3. VOUT (Output Voltage) 4. NC (No Connection) 5. CE (Chip Enable)

Functional Features

  • Low dropout voltage
  • Low power consumption
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages

  • Wide input voltage range
  • Stable and reliable output voltage
  • Small package size
  • Built-in protection features

Disadvantages

  • Limited maximum output current
  • Restricted operating temperature range

Working Principles

The S-1172B48-E6T1G operates by comparing the reference voltage with the feedback voltage to control the output voltage, ensuring a stable and regulated output regardless of variations in the input voltage.

Detailed Application Field Plans

The S-1172B48-E6T1G is commonly used in battery-powered devices, portable electronics, and low-power applications where a stable voltage supply is essential.

Detailed and Complete Alternative Models

  • S-1172 Series by Seiko Instruments
  • LM1117 Series by Texas Instruments
  • MCP1700 Series by Microchip Technology

Note: The above alternative models provide similar voltage regulation capabilities and can be considered as alternatives to the S-1172B48-E6T1G.

This content provides a comprehensive overview of the S-1172B48-E6T1G, covering its basic information, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Texniki həllərdə S-1172B48-E6T1G tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is S-1172B48-E6T1G?

    • S-1172B48-E6T1G is a low dropout voltage regulator (LDO) designed for use in various technical solutions to provide stable and regulated power supply.

  2. What is the input voltage range for S-1172B48-E6T1G?

    • The input voltage range for S-1172B48-E6T1G is typically between 2.5V and 16V.

  3. What is the output voltage of S-1172B48-E6T1G?

    • The output voltage of S-1172B48-E6T1G is fixed at 4.8V.

  4. What is the maximum output current of S-1172B48-E6T1G?

    • The maximum output current of S-1172B48-E6T1G is typically 1A.

  5. What are the typical applications of S-1172B48-E6T1G?

    • S-1172B48-E6T1G is commonly used in battery-powered devices, portable equipment, and other applications requiring a stable 4.8V power supply.

  6. What are the key features of S-1172B48-E6T1G?

    • Some key features of S-1172B48-E6T1G include low dropout voltage, low quiescent current, thermal shutdown protection, and overcurrent protection.

  7. What are the recommended input and output capacitors for S-1172B48-E6T1G?

    • It is recommended to use a 10μF ceramic capacitor at the input and a 22μF ceramic capacitor at the output for optimal performance.

  8. Is S-1172B48-E6T1G suitable for automotive applications?

    • Yes, S-1172B48-E6T1G is suitable for automotive applications as it meets the necessary quality and reliability standards.

  9. Does S-1172B48-E6T1G require any external components for operation?

    • S-1172B48-E6T1G requires minimal external components for operation, making it easy to integrate into various technical solutions.

  10. What are the operating temperature and package type of S-1172B48-E6T1G?

    • S-1172B48-E6T1G has an operating temperature range of -40°C to 85°C and is available in a small SOT-89 package for space-constrained applications.