Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1206B38-M3T1U
Product Overview
The S-1206B38-M3T1U belongs to the category of voltage regulators and is commonly used in electronic devices to regulate and stabilize voltage levels. Its characteristics include high efficiency, low power consumption, compact package size, and excellent line and load regulation. The product is typically packaged in a small surface-mount package and is available in various quantities.
Specifications
- Input Voltage Range: 2.0V to 6.0V
- Output Voltage: 3.8V
- Maximum Output Current: 200mA
- Dropout Voltage: 160mV @ 100mA
- Quiescent Current: 30µA (typical)
Detailed Pin Configuration
The S-1206B38-M3T1U has three pins: 1. VIN (Input Voltage) 2. GND (Ground) 3. VOUT (Output Voltage)
Functional Features
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short-circuit protection
Advantages
- Small package size
- Wide input voltage range
- Low dropout voltage
- Excellent line and load regulation
Disadvantages
- Limited maximum output current
- Not suitable for high-power applications
Working Principles
The S-1206B38-M3T1U operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a stable output voltage despite changes in input voltage and load conditions.
Detailed Application Field Plans
The S-1206B38-M3T1U is commonly used in battery-powered devices, portable electronics, and low-power microcontroller-based systems where a stable voltage supply is essential for proper operation.
Detailed and Complete Alternative Models
- S-1206B33-M3T1U (Output Voltage: 3.3V)
- S-1206B50-M3T1U (Output Voltage: 5.0V)
- S-1206B18-M3T1U (Output Voltage: 1.8V)
This completes the entry for the S-1206B38-M3T1U in the English editing encyclopedia format.
Texniki həllərdə S-1206B38-M3T1U tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
What is S-1206B38-M3T1U?
- S-1206B38-M3T1U is a voltage regulator IC (integrated circuit) commonly used in technical solutions to regulate and stabilize voltage levels.
What are the key features of S-1206B38-M3T1U?
- The key features of S-1206B38-M3T1U include a wide input voltage range, low dropout voltage, high ripple rejection, and overcurrent protection.
How is S-1206B38-M3T1U typically used in technical solutions?
- S-1206B38-M3T1U is often used to provide a stable and regulated voltage supply for various electronic devices and circuits, such as microcontrollers, sensors, and other integrated circuits.
What are the typical applications of S-1206B38-M3T1U?
- Typical applications of S-1206B38-M3T1U include battery-powered devices, portable electronics, automotive systems, and industrial control systems.
What is the input voltage range of S-1206B38-M3T1U?
- The input voltage range of S-1206B38-M3T1U is typically between 2.5V and 18V, making it suitable for a wide range of power supply configurations.
Does S-1206B38-M3T1U require any external components for operation?
- S-1206B38-M3T1U requires only a few external components, such as capacitors and resistors, to function properly in a given circuit.
What is the output current capability of S-1206B38-M3T1U?
- The output current capability of S-1206B38-M3T1U is typically up to 200mA, making it suitable for powering a variety of low-power electronic devices.
Is S-1206B38-M3T1U available in different package types?
- Yes, S-1206B38-M3T1U is available in various package types, including SOT-23, SOT-89, and DFN, providing flexibility for different design requirements.
What are the thermal considerations for using S-1206B38-M3T1U?
- Proper heat sinking and thermal management should be considered when using S-1206B38-M3T1U to ensure optimal performance and reliability, especially in high-power applications.
Where can I find detailed technical specifications and application notes for S-1206B38-M3T1U?
- Detailed technical specifications and application notes for S-1206B38-M3T1U can be found on the manufacturer's website or in the product datasheet provided by the supplier.