ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1312A18-M5T1U3
Ətraflı Baxın Məlumat vərəqləri

S-1312A18-M5T1U3

Product Overview

Category

The S-1312A18-M5T1U3 belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Input Voltage: 2.0V to 6.0V
  • Output Voltage: 1.8V
  • Maximum Output Current: 500mA
  • Low Dropout Voltage: 160mV @ 300mA
  • Low Standby Current: 0.1µA (TYP.)
  • Package: SOT-23-5
  • Operating Temperature Range: -40°C to +85°C

Package

The S-1312A18-M5T1U3 is available in a SOT-23-5 package.

Essence

This voltage regulator provides stable and reliable voltage output for various electronic applications.

Packaging/Quantity

The S-1312A18-M5T1U3 is typically available in reels with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.0V to 6.0V
  • Output Voltage: 1.8V ±2%
  • Output Current: 500mA (max)
  • Dropout Voltage: 160mV @ 300mA
  • Quiescent Current: 0.1µA (typical)
  • Operating Temperature Range: -40°C to +85°C
  • Package: SOT-23-5

Detailed Pin Configuration

The S-1312A18-M5T1U3 has the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. CE (Control Enable)

Functional Features

  • Low dropout voltage
  • Low standby current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Wide input voltage range
  • Low dropout voltage
  • Low standby current
  • Built-in protection features

Disadvantages

  • Limited maximum output current (500mA)

Working Principles

The S-1312A18-M5T1U3 uses a feedback control mechanism to maintain a stable output voltage, even with variations in the input voltage and load conditions. It employs a low dropout voltage design to ensure efficient regulation.

Detailed Application Field Plans

The S-1312A18-M5T1U3 is suitable for various applications including: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the S-1312A18-M5T1U3 include: - S-1312B18-M5T1U3 - S-1312C18-M5T1U3 - S-1312D18-M5T1U3 - S-1312E18-M5T1U3

In conclusion, the S-1312A18-M5T1U3 is a versatile voltage regulator with a wide input voltage range, making it suitable for various electronic applications. Its low dropout voltage and standby current, along with built-in protection features, make it an ideal choice for battery-powered and portable devices.

[Word count: 473]

Texniki həllərdə S-1312A18-M5T1U3 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is S-1312A18-M5T1U3?

    • S-1312A18-M5T1U3 is a voltage regulator IC commonly used in technical solutions to regulate and stabilize voltage levels.

  2. What is the input voltage range for S-1312A18-M5T1U3?

    • The input voltage range for S-1312A18-M5T1U3 is typically between 2.0V and 6.0V.

  3. What is the output voltage of S-1312A18-M5T1U3?

    • The output voltage of S-1312A18-M5T1U3 is fixed at 1.8V.

  4. What is the maximum output current of S-1312A18-M5T1U3?

    • The maximum output current of S-1312A18-M5T1U3 is around 150mA.

  5. What are the typical applications of S-1312A18-M5T1U3?

    • S-1312A18-M5T1U3 is commonly used in battery-powered devices, portable equipment, and other applications requiring a stable 1.8V power supply.

  6. Does S-1312A18-M5T1U3 require external components for operation?

    • Yes, S-1312A18-M5T1U3 requires external capacitors for stable operation.

  7. Is S-1312A18-M5T1U3 suitable for low-power applications?

    • Yes, S-1312A18-M5T1U3 is suitable for low-power applications due to its low quiescent current.

  8. What is the thermal shutdown feature of S-1312A18-M5T1U3?

    • S-1312A18-M5T1U3 includes a thermal shutdown feature that protects the IC from overheating.

  9. Can S-1312A18-M5T1U3 be used in automotive applications?

    • Yes, S-1312A18-M5T1U3 is suitable for automotive applications within its specified operating conditions.

  10. What are the key advantages of using S-1312A18-M5T1U3 in technical solutions?

    • The key advantages of S-1312A18-M5T1U3 include its small package size, low dropout voltage, and high ripple rejection ratio, making it ideal for space-constrained and noise-sensitive applications.