Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1312B13-M5T1U3
Product Overview
Category
The S-1312B13-M5T1U3 belongs to the category of voltage regulators.
Use
This product is commonly used for voltage regulation in electronic circuits.
Characteristics
- Input Voltage Range: 2.0V to 6.0V
- Output Voltage Range: 0.8V to 5.5V
- Maximum Output Current: 300mA
- Dropout Voltage: 160mV (at 100mA)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Package
The S-1312B13-M5T1U3 is available in a small and compact SOT-23-5 package.
Essence
This voltage regulator is designed to provide stable and regulated output voltage for various electronic applications.
Packaging/Quantity
The S-1312B13-M5T1U3 is typically packaged in reels, with 3000 units per reel.
Specifications
- Input Voltage Range: 2.0V to 6.0V
- Output Voltage Range: 0.8V to 5.5V
- Maximum Output Current: 300mA
- Dropout Voltage: 160mV (at 100mA)
- Quiescent Current: 30µA (typical)
- Line Regulation: ±0.05% (typical)
- Load Regulation: ±0.2% (typical)
- Ripple Rejection Ratio: 70dB (typical)
- Output Noise Voltage: 60µVrms (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1312B13-M5T1U3 has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- CE (Control Enable)
- VOUT (Output Voltage)
- NC (No Connection)
Functional Features
- Low dropout voltage
- Low quiescent current
- High ripple rejection ratio
- Excellent line and load regulation
- Short-circuit protection
- Thermal shutdown protection
Advantages and Disadvantages
Advantages
- Wide input voltage range
- Stable and regulated output voltage
- Compact package size
- Low power consumption
- Protection features for enhanced reliability
Disadvantages
- Maximum output current limited to 300mA
- Dropout voltage may affect efficiency in low input voltage scenarios
Working Principles
The S-1312B13-M5T1U3 utilizes a voltage reference, error amplifier, and pass transistor to regulate the output voltage. The control enable (CE) pin allows for easy on/off control of the regulator. When the input voltage falls within the specified range, the regulator maintains a stable output voltage by adjusting the pass transistor accordingly.
Detailed Application Field Plans
The S-1312B13-M5T1U3 can be used in various electronic applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics - Industrial equipment
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the S-1312B13-M5T1U3 include: - S-1312B18-M5T1U3 - S-1312B25-M5T1U3 - S-1312B33-M5T1U3 - S-1312B50-M5T1U3
These models have different output voltage ranges and maximum output currents, allowing for flexibility in various applications.
Word count: 431 words
Texniki həllərdə S-1312B13-M5T1U3 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
What is the typical input voltage range for S-1312B13-M5T1U3?
- The typical input voltage range for S-1312B13-M5T1U3 is 2.0V to 6.0V.What is the maximum output current of S-1312B13-M5T1U3?
- The maximum output current of S-1312B13-M5T1U3 is 150mA.Can S-1312B13-M5T1U3 be used in battery-powered applications?
- Yes, S-1312B13-M5T1U3 is suitable for battery-powered applications due to its low quiescent current.What are the typical applications for S-1312B13-M5T1U3?
- Typical applications for S-1312B13-M5T1U3 include portable devices, IoT devices, and power management in various electronic systems.Does S-1312B13-M5T1U3 have built-in overcurrent protection?
- Yes, S-1312B13-M5T1U3 features built-in overcurrent protection for added safety.What is the operating temperature range of S-1312B13-M5T1U3?
- The operating temperature range of S-1312B13-M5T1U3 is -40°C to 85°C.Is S-1312B13-M5T1U3 available in a small package size?
- Yes, S-1312B13-M5T1U3 is available in a compact SOT-23-5 package.Can S-1312B13-M5T1U3 be used in automotive applications?
- Yes, S-1312B13-M5T1U3 is suitable for automotive applications, provided it meets the specific requirements and standards.What is the dropout voltage of S-1312B13-M5T1U3?
- The dropout voltage of S-1312B13-M5T1U3 is typically 200mV at 100mA load.Are there any recommended external components to use with S-1312B13-M5T1U3?
- It is recommended to use input and output capacitors with S-1312B13-M5T1U3 for stability and performance optimization.