Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1312B28-A4T1U3
Product Overview
Category
S-1312B28-A4T1U3 belongs to the category of voltage regulators.
Use
This product is used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
The S-1312B28-A4T1U3 comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.
Packaging/Quantity
The S-1312B28-A4T1U3 is typically packaged in reels and is available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 2.8V
- Output Current: 100mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1312B28-A4T1U3 has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
Functional Features
- Low dropout voltage ensures efficient power conversion.
- Overcurrent protection safeguards the circuit from excessive current flow.
- Thermal shutdown protection prevents overheating of the regulator.
- Wide input voltage range allows flexibility in various applications.
Advantages and Disadvantages
Advantages
- Small form factor enables space-saving designs.
- High efficiency results in minimal power loss.
- Overcurrent and thermal protection enhance circuit reliability.
- Wide input voltage range accommodates diverse applications.
Disadvantages
- Limited output current may restrict usage in high-power applications.
- Dropout voltage may affect performance in low-input voltage scenarios.
Working Principles
The S-1312B28-A4T1U3 operates based on the principle of voltage regulation. It takes an input voltage within the specified range and provides a stable output voltage of 2.8V, even when the input voltage fluctuates. This is achieved through internal circuitry that adjusts the voltage levels and compensates for variations.
Detailed Application Field Plans
The S-1312B28-A4T1U3 finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT (Internet of Things) devices - Wearable technology - Embedded systems
Detailed and Complete Alternative Models
- S-1312B25-A4T1U3: Output voltage of 2.5V
- S-1312B33-A4T1U3: Output voltage of 3.3V
- S-1312B50-A4T1U3: Output voltage of 5.0V
These alternative models provide different output voltage options while sharing similar characteristics and features with the S-1312B28-A4T1U3.
In conclusion, the S-1312B28-A4T1U3 is a compact voltage regulator with high efficiency, low dropout voltage, and various protection mechanisms. Its wide application field and availability of alternative models make it a versatile choice for voltage regulation in electronic circuits.
Texniki həllərdə S-1312B28-A4T1U3 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
Sure! Here are 10 common questions and answers related to the application of S-1312B28-A4T1U3 in technical solutions:
Q1: What is S-1312B28-A4T1U3? A1: S-1312B28-A4T1U3 is a specific model or part number of a component used in technical solutions, such as electronic circuits or systems.
Q2: What is the purpose of S-1312B28-A4T1U3? A2: The purpose of S-1312B28-A4T1U3 is to perform a specific function within a technical solution, such as voltage regulation or power management.
Q3: How does S-1312B28-A4T1U3 work? A3: S-1312B28-A4T1U3 works by receiving an input voltage and regulating it to provide a stable output voltage according to its specifications.
Q4: What are the key features of S-1312B28-A4T1U3? A4: Some key features of S-1312B28-A4T1U3 may include low dropout voltage, high efficiency, overcurrent protection, thermal shutdown, and small form factor.
Q5: What is the maximum input voltage supported by S-1312B28-A4T1U3? A5: The maximum input voltage supported by S-1312B28-A4T1U3 is typically specified in its datasheet, which should be consulted for accurate information.
Q6: Can S-1312B28-A4T1U3 handle high current loads? A6: The current handling capability of S-1312B28-A4T1U3 depends on its specifications. It is important to check the datasheet for the maximum current rating.
Q7: Is S-1312B28-A4T1U3 suitable for battery-powered applications? A7: Yes, S-1312B28-A4T1U3 is often used in battery-powered applications due to its low dropout voltage and efficient power management capabilities.
Q8: Can S-1312B28-A4T1U3 be used in automotive applications? A8: Some variants of S-1312B28-A4T1U3 may be designed for automotive applications, but it is essential to verify if it meets the required automotive standards.
Q9: Are there any specific precautions to consider when using S-1312B28-A4T1U3? A9: Precautions such as proper heat dissipation, input/output voltage limits, and adherence to manufacturer guidelines should be followed to ensure optimal performance.
Q10: Where can I find more information about S-1312B28-A4T1U3? A10: More detailed information about S-1312B28-A4T1U3 can be found in its datasheet, which is typically available on the manufacturer's website or through authorized distributors.
Please note that the answers provided here are general and may vary depending on the specific specifications and requirements of S-1312B28-A4T1U3.