S-1313A19-A4T1U3

Basic Information Overview

Category: Integrated Circuit (IC)
Use: Voltage Regulator
Characteristics: Low Dropout, High Accuracy, Low Quiescent Current
Package: SOT-89-5
Essence: Regulates voltage to a stable level
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

Input Voltage Range: 2.5V - 6.0V
Output Voltage Range: 1.2V - 5.5V
Dropout Voltage: 200mV @ 100mA
Quiescent Current: 30µA
Output Current: 150mA
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1313A19-A4T1U3 IC has the following pin configuration: 1. VIN: Input Voltage 2. GND: Ground 3. CE: Chip Enable 4. VOUT: Output Voltage 5. NC: No Connection

Functional Features

Low dropout voltage ensures efficient power conversion.
High accuracy provides precise voltage regulation.
Low quiescent current minimizes power consumption.
Chip enable pin allows for easy control of the regulator.

Advantages and Disadvantages

Advantages: - Wide input voltage range allows for versatile applications. - Small package size enables space-saving designs. - Excellent line and load regulation ensures stable output voltage.

Disadvantages: - Limited output current may not be suitable for high-power applications. - Non-adjustable output voltage restricts flexibility in certain scenarios.

Working Principles

The S-1313A19-A4T1U3 is a linear voltage regulator that utilizes a PNP transistor as the pass element. It regulates the output voltage by comparing a reference voltage with the feedback voltage. When the input voltage exceeds the desired output voltage, the pass element adjusts its resistance to maintain a stable output.

Detailed Application Field Plans

The S-1313A19-A4T1U3 is commonly used in various electronic devices that require stable and regulated power supply. Some typical applications include: - Battery-powered devices - Portable audio players - Wireless communication modules - Industrial control systems

Detailed and Complete Alternative Models

S-1313B19-A4T1U3: Similar specifications but with adjustable output voltage.
S-1313C19-A4T1U3: Higher output current capability (300mA) but slightly higher dropout voltage.
S-1313D19-A4T1U3: Lower quiescent current (10µA) for ultra-low power applications.

Note: The above alternative models are from the same product series and have similar pin configurations.

This concludes the entry on the S-1313A19-A4T1U3 voltage regulator.

Texniki həllərdə S-1313A19-A4T1U3 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-1313A19-A4T1U3 in technical solutions:

Q1: What is S-1313A19-A4T1U3? A1: S-1313A19-A4T1U3 is a specific model or part number of a component used in technical solutions.

Q2: What is the purpose of S-1313A19-A4T1U3? A2: The purpose of S-1313A19-A4T1U3 is to serve a specific function within a technical solution, such as voltage regulation or power management.

Q3: How does S-1313A19-A4T1U3 work? A3: S-1313A19-A4T1U3 works by receiving an input voltage and regulating it to provide a stable output voltage according to its specifications.

Q4: What are the key features of S-1313A19-A4T1U3? A4: Some key features of S-1313A19-A4T1U3 may include low dropout voltage, high accuracy, overcurrent protection, and thermal shutdown.

Q5: What are the typical applications of S-1313A19-A4T1U3? A5: S-1313A19-A4T1U3 can be commonly used in various applications such as battery-powered devices, portable electronics, embedded systems, and IoT devices.

Q6: What is the input voltage range for S-1313A19-A4T1U3? A6: The input voltage range for S-1313A19-A4T1U3 may vary, but typically it can handle voltages between X volts and Y volts.

Q7: What is the output voltage range of S-1313A19-A4T1U3? A7: The output voltage range of S-1313A19-A4T1U3 is typically Z volts, as specified in its datasheet.

Q8: How much current can S-1313A19-A4T1U3 handle? A8: The maximum current handling capacity of S-1313A19-A4T1U3 is typically A amperes, as specified in its datasheet.

Q9: Is S-1313A19-A4T1U3 compatible with other components or microcontrollers? A9: Yes, S-1313A19-A4T1U3 is designed to be compatible with various components and microcontrollers commonly used in technical solutions.

Q10: Where can I find more information about S-1313A19-A4T1U3? A10: You can find more detailed information about S-1313A19-A4T1U3 in its datasheet provided by the manufacturer or by contacting the manufacturer directly.