S-1313B23-M5T1U3

Product Overview

Category

S-1313B23-M5T1U3 belongs to the category of voltage regulators.

Use

This product is used for regulating voltage in electronic circuits.

Characteristics

• Compact size
• High efficiency
• Low power consumption
• Wide input voltage range
• Overcurrent protection
• Thermal shutdown protection

Package

The S-1313B23-M5T1U3 comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

The S-1313B23-M5T1U3 is typically packaged in reels and available in quantities of 3000 units per reel.

Specifications

• Input Voltage Range: 2.0V to 6.0V
• Output Voltage Range: 1.8V to 5.0V
• Output Current: Up to 150mA
• Dropout Voltage: 200mV (typical)
• Quiescent Current: 30µA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1313B23-M5T1U3 has the following pin configuration:

1. VIN: Input voltage pin
2. GND: Ground pin
3. VOUT: Output voltage pin
4. CE: Chip enable pin

Functional Features

• Voltage regulation: The S-1313B23-M5T1U3 ensures a stable output voltage regardless of input voltage fluctuations.
• Overcurrent protection: The device automatically shuts down when the output current exceeds the specified limit, protecting the circuit from damage.
• Thermal shutdown protection: In case of excessive temperature, the regulator enters a shutdown mode to prevent overheating.

Advantages and Disadvantages

Advantages

• Compact size allows for easy integration into space-constrained designs.
• High efficiency results in minimal power loss during voltage regulation.
• Wide input voltage range enables compatibility with various power sources.

Disadvantages

• Limited output current capacity may not be suitable for high-power applications.
• Dropout voltage of 200mV may affect the performance of low-voltage devices.

Working Principles

The S-1313B23-M5T1U3 utilizes a combination of internal circuitry and feedback mechanisms to maintain a stable output voltage. It adjusts its internal resistance based on the input voltage to ensure a consistent output regardless of fluctuations.

Detailed Application Field Plans

The S-1313B23-M5T1U3 finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

• S-1313B25-M5T1U3: Similar to S-1313B23-M5T1U3 but with higher output current capacity (up to 250mA).
• S-1313B23-M5T1U2: Similar to S-1313B23-M5T1U3 but with a lower dropout voltage (150mV).

These alternative models provide options with different specifications to suit specific application requirements.

In conclusion, the S-1313B23-M5T1U3 is a compact and efficient voltage regulator that offers stable voltage output for various electronic devices. Its wide input voltage range, overcurrent protection, and thermal shutdown features make it a reliable choice for many applications. However, its limited output current capacity and dropout voltage should be considered when selecting the appropriate model for specific use cases.