ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1313B33-M5T1U3
Ətraflı Baxın Məlumat vərəqləri

S-1313B33-M5T1U3

Introduction

The S-1313B33-M5T1U3 is a voltage regulator belonging to the category of electronic components. This device is commonly used to regulate voltage in various electronic circuits and systems. It possesses unique characteristics, packaging, and quantity specifications that make it suitable for a wide range of applications.

Basic Information Overview

  • Category: Electronic component
  • Use: Voltage regulation
  • Characteristics: High precision, low dropout voltage, small package size
  • Package: SOT-23-5
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 3.3V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 160mV @ 100mA
  • Quiescent Current: 30µA (typical)

Detailed Pin Configuration

The S-1313B33-M5T1U3 has a standard SOT-23-5 pin configuration: 1. VIN (Input voltage) 2. GND (Ground) 3. NC (No connection) 4. VOUT (Output voltage) 5. CE (Chip enable)

Functional Features

  • Low Dropout Voltage: Enables efficient regulation with minimal power loss
  • High Precision: Provides accurate and stable output voltage
  • Small Package Size: Ideal for space-constrained applications

Advantages and Disadvantages

Advantages

  • Compact size
  • Low dropout voltage
  • High precision

Disadvantages

  • Limited maximum output current
  • Restricted input voltage range

Working Principles

The S-1313B33-M5T1U3 operates by comparing the reference voltage with the feedback voltage to adjust the output voltage. When the input voltage fluctuates, the internal circuitry responds to maintain a constant output voltage.

Detailed Application Field Plans

This voltage regulator is widely used in portable electronic devices, battery-powered systems, and low-power applications where a stable voltage supply is crucial. Its small form factor and low dropout voltage make it suitable for space-constrained designs.

Detailed and Complete Alternative Models

  • S-1313B33-M5T1U3R (Reverse polarity protection)
  • S-1313B33-M5T1U3X (Extended temperature range)

In conclusion, the S-1313B33-M5T1U3 voltage regulator offers high precision and compact design, making it an ideal choice for various electronic applications requiring stable voltage regulation.

[Word count: 366]

Texniki həllərdə S-1313B33-M5T1U3 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is S-1313B33-M5T1U3?

    • S-1313B33-M5T1U3 is a voltage regulator IC designed for use in various technical solutions to regulate voltage levels.

  2. What are the key features of S-1313B33-M5T1U3?

    • The key features include a wide input voltage range, low dropout voltage, and overcurrent protection, making it suitable for a variety of applications.

  3. In what technical solutions can S-1313B33-M5T1U3 be used?

    • S-1313B33-M5T1U3 can be used in battery-powered devices, portable electronics, and other applications requiring stable voltage regulation.

  4. What is the typical output current of S-1313B33-M5T1U3?

    • The typical output current is around 500mA, making it suitable for powering moderate loads in many technical solutions.

  5. How does S-1313B33-M5T1U3 handle overcurrent situations?

    • S-1313B33-M5T1U3 incorporates overcurrent protection to safeguard the device and the load in case of excessive current draw.

  6. What is the operating temperature range of S-1313B33-M5T1U3?

    • The operating temperature range typically spans from -40°C to 85°C, ensuring reliable performance in various environmental conditions.

  7. Can S-1313B33-M5T1U3 be used in automotive applications?

    • Yes, S-1313B33-M5T1U3 is often used in automotive electronics due to its robust design and ability to withstand automotive operating conditions.

  8. Does S-1313B33-M5T1U3 require external components for voltage regulation?

    • S-1313B33-M5T1U3 requires minimal external components, simplifying its integration into technical solutions.

  9. Is S-1313B33-M5T1U3 suitable for low-power applications?

    • Yes, S-1313B33-M5T1U3's low dropout voltage and low quiescent current make it well-suited for low-power applications.

  10. Where can I find detailed application notes for using S-1313B33-M5T1U3 in technical solutions?

    • Detailed application notes and specifications for S-1313B33-M5T1U3 can be found on the manufacturer's website or in the product datasheet.