Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1313D11-A4T1U3
Product Overview
Category
S-1313D11-A4T1U3 belongs to the category of voltage regulators.
Use
This product is used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low power consumption
- Wide input voltage range
- Adjustable output voltage
- Overcurrent protection
- Thermal shutdown protection
Package
The S-1313D11-A4T1U3 comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.
Packaging/Quantity
The S-1313D11-A4T1U3 is typically packaged in reels and is available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.5V
- Output Current: Up to 100mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1313D11-A4T1U3 has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin (active high)
Functional Features
- Voltage regulation: The S-1313D11-A4T1U3 ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: The device automatically shuts down when the output current exceeds the specified limit, protecting the circuit from damage.
- Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent overheating.
Advantages and Disadvantages
Advantages
- Compact size allows for easy integration into small electronic devices.
- High efficiency results in minimal power loss during voltage regulation.
- Wide input voltage range makes it compatible with various power sources.
- Adjustable output voltage provides flexibility for different applications.
- Overcurrent and thermal shutdown protection enhance circuit reliability.
Disadvantages
- Limited output current capacity may not be suitable for high-power applications.
- Dropout voltage of 200mV may affect performance in low-voltage scenarios.
Working Principles
The S-1313D11-A4T1U3 utilizes a feedback mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.
Detailed Application Field Plans
The S-1313D11-A4T1U3 is commonly used in the following applications:
- Battery-powered devices: Provides regulated voltage to ensure consistent performance even as the battery discharges.
- Portable electronics: Enables efficient power management in smartphones, tablets, and other portable devices.
- IoT devices: Suitable for low-power IoT applications where energy efficiency is crucial.
- Wearable devices: Compact size and low power consumption make it ideal for wearable technology.
Detailed and Complete Alternative Models
- S-1313D11-A4T1U2: Similar to S-1313D11-A4T1U3 but with a lower output current capacity.
- S-1313D11-A4T1U4: Similar to S-1313D11-A4T1U3 but with a higher output current capacity.
- S-1313D11-A4T1U5: Similar to S-1313D11-A4T1U3 but with additional features such as adjustable current limit.
These alternative models offer different specifications and capabilities to suit various application requirements.
Word count: 526 words
Texniki həllərdə S-1313D11-A4T1U3 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
Sure! Here are 10 common questions and answers related to the application of S-1313D11-A4T1U3 in technical solutions:
Q1: What is S-1313D11-A4T1U3? A1: S-1313D11-A4T1U3 is a specific model or component used in technical solutions, typically in electronic devices.
Q2: What is the purpose of S-1313D11-A4T1U3? A2: The purpose of S-1313D11-A4T1U3 is to perform a specific function within a technical solution, such as voltage regulation or power management.
Q3: How does S-1313D11-A4T1U3 work? A3: S-1313D11-A4T1U3 works by receiving an input voltage and regulating it to provide a stable output voltage for the connected components.
Q4: What are the key features of S-1313D11-A4T1U3? A4: Some key features of S-1313D11-A4T1U3 may include high efficiency, low power consumption, overcurrent protection, and thermal shutdown.
Q5: What are the typical applications of S-1313D11-A4T1U3? A5: S-1313D11-A4T1U3 can be used in various technical solutions, including mobile devices, IoT devices, power supplies, and battery-powered systems.
Q6: What is the input voltage range supported by S-1313D11-A4T1U3? A6: The input voltage range supported by S-1313D11-A4T1U3 may vary, but it is typically specified in the product datasheet. Common ranges include 2.5V to 5.5V or 4.5V to 18V.
Q7: What is the output voltage range provided by S-1313D11-A4T1U3? A7: The output voltage range provided by S-1313D11-A4T1U3 depends on the specific model and can be adjusted using external components. Common ranges include 1.2V to 5V.
Q8: How much current can S-1313D11-A4T1U3 handle? A8: The maximum current handling capacity of S-1313D11-A4T1U3 is specified in the product datasheet. It typically ranges from a few hundred milliamperes (mA) to several amperes (A).
Q9: Is S-1313D11-A4T1U3 compatible with other components or microcontrollers? A9: Yes, S-1313D11-A4T1U3 is designed to be compatible with various components and microcontrollers commonly used in technical solutions. However, it's important to check the compatibility requirements and specifications.
Q10: Are there any recommended application circuits or reference designs for S-1313D11-A4T1U3? A10: Yes, the manufacturer of S-1313D11-A4T1U3 usually provides application notes, reference designs, and example circuits that can help users integrate the component into their technical solutions effectively.
Please note that the answers provided here are general and may vary depending on the specific model and manufacturer of S-1313D11-A4T1U3. It's always recommended to refer to the product datasheet and consult the manufacturer for accurate and detailed information.