Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1317A18-A4T2U4
Basic Information Overview
Category: Integrated Circuit (IC)
Use: Voltage Regulator
Characteristics: - Low dropout voltage - High output voltage accuracy - Low quiescent current - Overcurrent protection - Thermal shutdown protection
Package: SOT-89-5
Essence: The S-1317A18-A4T2U4 is a voltage regulator IC that provides a stable output voltage for various electronic devices.
Packaging/Quantity: The S-1317A18-A4T2U4 is typically sold in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.0V to 6.0V
- Output Voltage Range: 1.8V
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30μA (typical)
- Output Current: 1A (maximum)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-1317A18-A4T2U4 has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- NC (No Connection)
- VOUT (Output Voltage)
- EN (Enable)
Functional Features
- Low dropout voltage ensures efficient power conversion even when the input voltage is close to the desired output voltage.
- High output voltage accuracy provides a stable and reliable power supply for sensitive electronic components.
- Low quiescent current minimizes power consumption during standby or idle modes.
- Overcurrent protection safeguards the IC and connected devices from excessive current flow.
- Thermal shutdown protection prevents overheating and potential damage to the IC.
Advantages and Disadvantages
Advantages: - High output voltage accuracy ensures reliable performance. - Low quiescent current minimizes power consumption. - Overcurrent and thermal shutdown protection enhance device safety.
Disadvantages: - Limited input voltage range (2.0V to 6.0V). - Dropout voltage of 200mV may affect efficiency in certain applications.
Working Principles
The S-1317A18-A4T2U4 operates as a linear voltage regulator. It regulates the input voltage to a stable output voltage of 1.8V by utilizing an internal reference voltage and feedback control mechanism. The IC adjusts its internal circuitry to maintain the desired output voltage, compensating for variations in input voltage and load conditions.
Detailed Application Field Plans
The S-1317A18-A4T2U4 is commonly used in various electronic devices that require a stable 1.8V power supply. Some typical application fields include:
- Mobile Devices: Smartphones, tablets, portable media players.
- Wireless Communication Systems: Bluetooth modules, Wi-Fi modules.
- Consumer Electronics: Digital cameras, portable gaming consoles.
- Industrial Equipment: Sensor modules, control systems.
- Automotive Electronics: Infotainment systems, navigation units.
Detailed and Complete Alternative Models
- S-1317B18-A4T2U4: Similar to S-1317A18-A4T2U4, but with an output voltage of 1.8V.
- S-1317C18-A4T2U4: Similar to S-1317A18-A4T2U4, but with an output voltage of 1.8V and additional features such as adjustable output voltage and enable/disable control.
These alternative models provide similar functionality and can be used as substitutes for the S-1317A18-A4T2U4 in various applications.
(Note: The content provided above is a sample and may not reflect the actual specifications and details of the S-1317A18-A4T2U4. Please refer to the manufacturer's datasheet for accurate information.)
Texniki həllərdə S-1317A18-A4T2U4 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
Sure! Here are 10 common questions and answers related to the application of S-1317A18-A4T2U4 in technical solutions:
Q: What is S-1317A18-A4T2U4? A: S-1317A18-A4T2U4 is a specific model or part number of a component used in technical solutions, typically an electronic device.
Q: What is the purpose of S-1317A18-A4T2U4 in technical solutions? A: The purpose of S-1317A18-A4T2U4 can vary depending on the specific application, but it is commonly used as a voltage regulator or power management component.
Q: What voltage range does S-1317A18-A4T2U4 support? A: S-1317A18-A4T2U4 typically supports a voltage range of X volts to Y volts (specific values may vary based on the component's datasheet).
Q: How much current can S-1317A18-A4T2U4 handle? A: S-1317A18-A4T2U4 has a maximum current rating of Z amps (specific value should be checked in the component's datasheet).
Q: Is S-1317A18-A4T2U4 suitable for battery-powered applications? A: Yes, S-1317A18-A4T2U4 is often used in battery-powered applications due to its low power consumption and efficient voltage regulation capabilities.
Q: Can S-1317A18-A4T2U4 be used in automotive applications? A: Yes, S-1317A18-A4T2U4 is designed to meet automotive-grade standards and can be used in automotive applications.
Q: Does S-1317A18-A4T2U4 have built-in protection features? A: Yes, S-1317A18-A4T2U4 typically includes various protection features such as overcurrent protection, thermal shutdown, and reverse polarity protection.
Q: What is the operating temperature range of S-1317A18-A4T2U4? A: The operating temperature range of S-1317A18-A4T2U4 is typically between -40°C to +85°C (specific values should be checked in the component's datasheet).
Q: Can S-1317A18-A4T2U4 be used in high-frequency applications? A: Yes, S-1317A18-A4T2U4 is designed to work well in high-frequency applications and provides stable voltage regulation even at higher frequencies.
Q: Are there any recommended external components to use with S-1317A18-A4T2U4? A: Depending on the specific application, it may be recommended to use input/output capacitors or other passive components to optimize the performance of S-1317A18-A4T2U4. The component's datasheet should provide guidelines for external component selection.
Please note that the answers provided here are general and may vary based on the specific datasheet and application requirements of S-1317A18-A4T2U4. It is always important to refer to the manufacturer's documentation for accurate and detailed information.