ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1323B35NB-N8UTFG
Ətraflı Baxın Məlumat vərəqləri

S-1323B35NB-N8UTFG

Basic Information Overview

  • Category: Electronic Component
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: SMD (Surface Mount Device)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 1000 pieces per reel

Specifications

  • Input Voltage Range: 4.5V to 24V
  • Output Voltage: 3.3V
  • Output Current: 1.5A
  • Dropout Voltage: 300mV at 1A
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1323B35NB-N8UTFG has the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VIN | Input Voltage | | 2 | GND | Ground | | 3 | VOUT | Output Voltage | | 4 | EN | Enable Pin |

Functional Features

  • High efficiency voltage regulation
  • Low power consumption
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Fast transient response

Advantages

  • Wide input voltage range allows for versatile applications
  • Low dropout voltage ensures efficient power conversion
  • Small package size saves board space
  • Excellent load and line regulation
  • Robust protection features enhance reliability

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Operating temperature range may restrict usage in extreme environments

Working Principles

The S-1323B35NB-N8UTFG is a voltage regulator that takes an input voltage within the specified range and provides a stable output voltage of 3.3V. It achieves this by using a combination of internal circuitry and feedback control mechanisms to regulate the output voltage despite variations in the input voltage and load conditions.

Detailed Application Field Plans

The S-1323B35NB-N8UTFG is commonly used in various electronic devices and systems that require stable power supply voltages. Some typical application fields include: - Battery-powered devices - Portable electronics - IoT (Internet of Things) devices - Embedded systems - Communication equipment

Detailed and Complete Alternative Models

  • S-1323B33NB-N8UTFG: Output voltage of 3.3V, same specifications as S-1323B35NB-N8UTFG but with lower dropout voltage.
  • S-1323B50NB-N8UTFG: Output voltage of 5.0V, higher output current capability compared to S-1323B35NB-N8UTFG.
  • S-1323B12NB-N8UTFG: Output voltage of 12V, suitable for applications requiring higher voltage levels.

Note: This is not an exhaustive list of alternative models, and there may be other similar products available in the market.

Word count: 346 words

Texniki həllərdə S-1323B35NB-N8UTFG tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-1323B35NB-N8UTFG in technical solutions:

  1. Q: What is S-1323B35NB-N8UTFG? A: S-1323B35NB-N8UTFG is a specific model or part number of a component used in technical solutions.

  2. Q: What is the purpose of S-1323B35NB-N8UTFG? A: The purpose of S-1323B35NB-N8UTFG is to perform a specific function within a technical solution, such as signal processing or power management.

  3. Q: How does S-1323B35NB-N8UTFG work? A: S-1323B35NB-N8UTFG works by receiving input signals, processing them according to its design, and producing the desired output signals.

  4. Q: What are the key features of S-1323B35NB-N8UTFG? A: The key features of S-1323B35NB-N8UTFG may include high efficiency, low power consumption, compact size, and compatibility with specific interfaces or protocols.

  5. Q: Can S-1323B35NB-N8UTFG be used in different technical solutions? A: Yes, S-1323B35NB-N8UTFG can be used in various technical solutions that require its specific functionality and meet its operating requirements.

  6. Q: Are there any limitations or constraints when using S-1323B35NB-N8UTFG? A: Yes, S-1323B35NB-N8UTFG may have limitations such as voltage or current ratings, temperature range, or specific environmental conditions for optimal performance.

  7. Q: How do I integrate S-1323B35NB-N8UTFG into my technical solution? A: Integration of S-1323B35NB-N8UTFG typically involves connecting it to the appropriate power supply, input/output signals, and configuring any necessary settings.

  8. Q: Are there any recommended best practices for using S-1323B35NB-N8UTFG? A: Yes, following the manufacturer's guidelines, datasheet, and application notes can help ensure proper usage and maximize the performance of S-1323B35NB-N8UTFG.

  9. Q: Can S-1323B35NB-N8UTFG be replaced with a different component in my technical solution? A: It depends on the specific requirements and compatibility of the alternative component. Consult the datasheets and seek expert advice if considering a replacement.

  10. Q: Where can I find more information about S-1323B35NB-N8UTFG? A: More information about S-1323B35NB-N8UTFG can be found in its datasheet, product documentation, or by contacting the manufacturer or distributor directly.