ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1323B38PF-N8XTFU
Ətraflı Baxın Məlumat vərəqləri

S-1323B38PF-N8XTFU

Product Overview

Category

S-1323B38PF-N8XTFU belongs to the category of electronic components.

Use

This product is commonly used in electronic circuits for various applications.

Characteristics

  • Compact size
  • High performance
  • Reliable operation
  • Wide temperature range

Package

S-1323B38PF-N8XTFU is available in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and efficient electrical signal processing.

Packaging/Quantity

This product is typically packaged in reels or trays, with varying quantities depending on customer requirements.

Specifications

  • Model: S-1323B38PF-N8XTFU
  • Operating Voltage: 3.3V
  • Output Voltage: 1.8V
  • Maximum Output Current: 500mA
  • Quiescent Current: 10μA (typical)
  • Dropout Voltage: 200mV (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages

  • Small form factor allows for space-saving designs
  • High efficiency ensures minimal power loss
  • Wide operating temperature range enables usage in various environments
  • Robust protection features enhance reliability

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Higher cost compared to alternative models with similar specifications

Working Principles

S-1323B38PF-N8XTFU operates as a voltage regulator, maintaining a stable output voltage even when the input voltage fluctuates. It achieves this through a combination of internal circuitry and feedback mechanisms.

Detailed Application Field Plans

This product finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

  1. S-1323B38PF-N8XVPU

    • Similar specifications to S-1323B38PF-N8XTFU
    • Different package type

  2. S-1323B38PF-N8XSGU

    • Higher output current capability
    • Same package type as S-1323B38PF-N8XTFU

These alternative models provide options for different design requirements while maintaining similar functionality.

Note: The above information is subject to change. Please refer to the product datasheet for the most up-to-date specifications and details.

Word count: 410

Texniki həllərdə S-1323B38PF-N8XTFU tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-1323B38PF-N8XTFU in technical solutions:

  1. Q: What is the S-1323B38PF-N8XTFU? A: The S-1323B38PF-N8XTFU is a specific model of electronic component, typically used in technical solutions.

  2. Q: What is the purpose of the S-1323B38PF-N8XTFU? A: The purpose of this component is to perform a specific function within a technical solution, such as voltage regulation or signal amplification.

  3. Q: What are the key features of the S-1323B38PF-N8XTFU? A: Some key features include its compact size, high efficiency, low power consumption, and wide operating temperature range.

  4. Q: In which applications can the S-1323B38PF-N8XTFU be used? A: This component can be used in various applications, including industrial automation, consumer electronics, telecommunications, and automotive systems.

  5. Q: What is the input voltage range for the S-1323B38PF-N8XTFU? A: The input voltage range typically varies from X volts to Y volts, depending on the specific model and variant.

  6. Q: What is the output voltage range for the S-1323B38PF-N8XTFU? A: The output voltage range usually ranges from A volts to B volts, again depending on the specific model and variant.

  7. Q: Does the S-1323B38PF-N8XTFU have any built-in protection features? A: Yes, it often includes built-in protection features such as overcurrent protection, thermal shutdown, and short-circuit protection.

  8. Q: Can the S-1323B38PF-N8XTFU be used in both AC and DC applications? A: No, this component is typically designed for DC applications only.

  9. Q: What is the typical operating temperature range for the S-1323B38PF-N8XTFU? A: The typical operating temperature range is usually between C degrees Celsius and D degrees Celsius.

  10. Q: Are there any recommended external components or circuitry to use with the S-1323B38PF-N8XTFU? A: It is often recommended to use input/output capacitors and resistors as per the manufacturer's guidelines to optimize performance and stability.

Please note that the specific details mentioned in the answers may vary depending on the actual specifications of the S-1323B38PF-N8XTFU model.