ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1335A28-A6T2U3
Ətraflı Baxın Məlumat vərəqləri

S-1335A28-A6T2U3

Product Overview

Category

S-1335A28-A6T2U3 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage detection and monitoring purposes.

Characteristics

  • Voltage detection range: 0.8V to 6.0V
  • Accuracy: ±1.0%
  • Low current consumption: 1.0µA (typical)
  • Operating temperature range: -40°C to +85°C
  • Small package size: SOT-23-6

Package

The S-1335A28-A6T2U3 is packaged in a SOT-23-6 package, which is a small surface-mount package with six pins.

Essence

The essence of S-1335A28-A6T2U3 lies in its ability to accurately detect and monitor voltage levels within a specified range.

Packaging/Quantity

This product is typically available in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Supply voltage range: 1.6V to 6.0V
  • Output voltage options: 2.8V
  • Quiescent current: 1.0µA (typical)
  • Output current capability: 100mA
  • Response time: 200µs (typical)

Detailed Pin Configuration

The S-1335A28-A6T2U3 has the following pin configuration:

  1. VDD: Supply voltage input
  2. GND: Ground reference
  3. OUT: Output voltage
  4. NC: No connection
  5. EN: Enable pin
  6. VIN: Voltage input

Functional Features

  • Accurate voltage detection within a wide range
  • Low quiescent current consumption
  • Fast response time
  • Enable pin for power-saving mode

Advantages and Disadvantages

Advantages

  • Wide voltage detection range
  • High accuracy
  • Low power consumption
  • Small package size for space-constrained applications
  • Fast response time

Disadvantages

  • Limited output current capability (100mA)

Working Principles

The S-1335A28-A6T2U3 operates based on a built-in voltage reference and comparator circuit. It compares the input voltage with a reference voltage and generates an output signal accordingly. The enable pin allows the device to enter a power-saving mode when not in use, reducing overall power consumption.

Detailed Application Field Plans

The S-1335A28-A6T2U3 finds application in various electronic devices where accurate voltage detection is crucial. Some potential application fields include:

  1. Battery-powered devices: Used to monitor battery voltage levels and provide low-battery warnings.
  2. Power management systems: Employed to detect and regulate voltage levels in power supply circuits.
  3. Consumer electronics: Integrated into devices such as smartphones, tablets, and portable gaming consoles to ensure stable operation.

Detailed and Complete Alternative Models

  1. S-1335A28-A6T1U3: Similar to S-1335A28-A6T2U3 but with a different output voltage option (2.8V).
  2. S-1335A28-A6T3U3: Offers the same features as S-1335A28-A6T2U3 but with a wider voltage detection range (0.8V to 10.0V).

These alternative models provide flexibility in selecting the appropriate voltage detection IC based on specific application requirements.

Word count: 536 words

Texniki həllərdə S-1335A28-A6T2U3 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-1335A28-A6T2U3 in technical solutions:

  1. Q: What is S-1335A28-A6T2U3? A: S-1335A28-A6T2U3 is a specific model or part number of a component used in technical solutions, typically an electronic or electrical device.

  2. Q: What is the purpose of S-1335A28-A6T2U3? A: The purpose of S-1335A28-A6T2U3 varies depending on its application, but it is commonly used for voltage regulation, power management, or signal conditioning in electronic circuits.

  3. Q: What are the key features of S-1335A28-A6T2U3? A: Some key features of S-1335A28-A6T2U3 may include low dropout voltage, high output current capability, thermal shutdown protection, and overcurrent protection.

  4. Q: How do I integrate S-1335A28-A6T2U3 into my technical solution? A: Integration of S-1335A28-A6T2U3 depends on the specific requirements of your solution. Typically, it involves connecting the necessary input and output pins of the component to the corresponding circuitry.

  5. Q: What is the operating voltage range of S-1335A28-A6T2U3? A: The operating voltage range of S-1335A28-A6T2U3 can vary, but it is typically specified in the datasheet provided by the manufacturer.

  6. Q: Can S-1335A28-A6T2U3 handle high currents? A: Yes, S-1335A28-A6T2U3 is designed to handle certain levels of current, but the maximum current rating should be checked in the datasheet to ensure it meets your requirements.

  7. Q: Does S-1335A28-A6T2U3 have any built-in protection features? A: Yes, S-1335A28-A6T2U3 may include built-in protection features such as thermal shutdown and overcurrent protection to safeguard against excessive heat or current.

  8. Q: Can S-1335A28-A6T2U3 be used in automotive applications? A: It depends on the specific automotive application and the requirements of the component. Some versions of S-1335A28-A6T2U3 may be suitable for automotive use, while others may not.

  9. Q: Are there any recommended operating conditions for S-1335A28-A6T2U3? A: Yes, the manufacturer's datasheet typically provides recommended operating conditions such as input voltage range, temperature range, and load conditions.

  10. Q: Where can I find more information about S-1335A28-A6T2U3? A: More information about S-1335A28-A6T2U3 can usually be found in the datasheet provided by the manufacturer. Additionally, online resources or technical support from the manufacturer can be helpful for further inquiries.