ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-1335B15-A4T2U3
Ətraflı Baxın Məlumat vərəqləri

S-1335B15-A4T2U3

Product Overview

Category

S-1335B15-A4T2U3 belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Wide input voltage range
  • Small package size
  • Low power consumption

Package

The S-1335B15-A4T2U3 comes in a compact surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring reliable operation of electronic devices.

Packaging/Quantity

The S-1335B15-A4T2U3 is typically packaged in reels and is available in quantities of 1000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.5V
  • Dropout Voltage: 200mV (typical)
  • Maximum Output Current: 150mA
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-1335B15-A4T2U3 has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection
  • Low ESR capacitor compatible

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures stable performance of electronic devices.
  • Low dropout voltage minimizes power loss.
  • Wide input voltage range allows for flexibility in various applications.
  • Small package size saves board space.
  • Low power consumption contributes to energy efficiency.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Operating temperature range may restrict usage in extreme environments.

Working Principles

The S-1335B15-A4T2U3 utilizes a feedback mechanism to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.

Detailed Application Field Plans

The S-1335B15-A4T2U3 is commonly used in the following applications:

  1. Battery-powered devices
  2. Portable electronic devices
  3. IoT devices
  4. Wearable technology
  5. Consumer electronics

Detailed and Complete Alternative Models

  1. S-1335B15-A4T1U3
  2. S-1335B15-A4T3U3
  3. S-1335B15-A4T4U3
  4. S-1335B15-A4T5U3
  5. S-1335B15-A4T6U3

These alternative models offer similar functionality and specifications, providing options for different design requirements.

In conclusion, the S-1335B15-A4T2U3 is a voltage regulator that offers high precision voltage regulation, low dropout voltage, and a wide input voltage range. Its compact package size and low power consumption make it suitable for various electronic applications. However, its limited maximum output current and operating temperature range should be considered when selecting this product for specific use cases.

Texniki həllərdə S-1335B15-A4T2U3 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-1335B15-A4T2U3 in technical solutions:

  1. Question: What is the purpose of S-1335B15-A4T2U3 in technical solutions?
    Answer: S-1335B15-A4T2U3 is a component used for voltage regulation and protection in various technical applications.

  2. Question: What is the input voltage range supported by S-1335B15-A4T2U3?
    Answer: The input voltage range supported by S-1335B15-A4T2U3 is typically between 2.5V and 6.0V.

  3. Question: Can S-1335B15-A4T2U3 handle high current loads?
    Answer: Yes, S-1335B15-A4T2U3 is designed to handle high current loads up to a certain limit specified in its datasheet.

  4. Question: Does S-1335B15-A4T2U3 have built-in overvoltage protection?
    Answer: Yes, S-1335B15-A4T2U3 incorporates overvoltage protection to safeguard the connected circuitry from excessive voltage levels.

  5. Question: Is S-1335B15-A4T2U3 suitable for battery-powered applications?
    Answer: Yes, S-1335B15-A4T2U3 is commonly used in battery-powered applications due to its low power consumption and efficient voltage regulation capabilities.

  6. Question: Can S-1335B15-A4T2U3 be used in automotive electronics?
    Answer: Yes, S-1335B15-A4T2U3 is often employed in automotive electronics as it meets the necessary requirements for voltage regulation and protection.

  7. Question: What is the typical output voltage range provided by S-1335B15-A4T2U3?
    Answer: The typical output voltage range of S-1335B15-A4T2U3 is between 1.0V and 5.5V, which can be adjusted using external components.

  8. Question: Does S-1335B15-A4T2U3 have short-circuit protection?
    Answer: Yes, S-1335B15-A4T2U3 incorporates short-circuit protection to prevent damage in case of a short circuit in the connected load.

  9. Question: Can S-1335B15-A4T2U3 operate in extreme temperature conditions?
    Answer: S-1335B15-A4T2U3 has a specified operating temperature range, typically between -40°C and +85°C, making it suitable for various environments.

  10. Question: Is S-1335B15-A4T2U3 RoHS compliant?
    Answer: Yes, S-1335B15-A4T2U3 is RoHS compliant, ensuring it meets the environmental standards set by regulatory bodies.

Please note that the specific details and answers may vary depending on the manufacturer's specifications and datasheet of S-1335B15-A4T2U3.