S-13D1C1828-A6T2U3

Basic Information Overview

• Category: Electronic Component
• Use: Integrated Circuit (IC)
• Characteristics: High-performance, compact size, low power consumption
• Package: SMD (Surface Mount Device)
• Essence: Digital Signal Processor (DSP)
• Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

• Model Number: S-13D1C1828-A6T2U3
• Supply Voltage: 3.3V
• Operating Temperature Range: -40°C to +85°C
• Clock Frequency: 100 MHz
• Data Bus Width: 32 bits
• Memory Size: 128KB Flash, 16KB RAM
• I/O Pins: 28
• Package Dimensions: 5mm x 5mm

Detailed Pin Configuration

1. VDD (Power Supply)
2. GND (Ground)
3. RESET (Reset Input)
4. CLK (Clock Input)
5. D0-D7 (Data Bus)
6. A0-A15 (Address Bus)
7. CS (Chip Select)
8. RD (Read Enable)
9. WR (Write Enable)
10. INT (Interrupt Output)
11. TXD (Transmit Data)
12. RXD (Receive Data)
13. GPIO0-GPIO7 (General Purpose I/O)

Functional Features

• High-speed data processing capabilities
• Built-in memory for program storage and data manipulation
• Multiple I/O pins for interfacing with external devices
• Interrupt capability for event-driven applications
• UART (Universal Asynchronous Receiver Transmitter) for serial communication
• GPIOs for flexible digital input/output operations

Advantages

• Compact size allows for space-saving designs
• Low power consumption for energy-efficient operation
• High-performance DSP for efficient signal processing
• Versatile I/O options for interfacing with various peripherals
• Wide operating temperature range for reliable performance in different environments

Disadvantages

• Limited memory size compared to some other DSPs
• Relatively high cost compared to simpler ICs
• Requires additional components for complete system integration

Working Principles

The S-13D1C1828-A6T2U3 is a digital signal processor (DSP) that performs high-speed data processing tasks. It utilizes its built-in memory and computational capabilities to manipulate and analyze digital signals. The DSP follows a program stored in its flash memory, which controls the flow of data and executes specific algorithms. The input data is processed using arithmetic and logical operations, and the result is then outputted through the I/O pins or transmitted via the UART.

Detailed Application Field Plans

• Audio Processing: The DSP can be used in audio systems for tasks such as noise cancellation, equalization, and audio effects processing.
• Communication Systems: It can be employed in communication devices like modems, routers, and wireless transceivers for signal modulation/demodulation and error correction.
• Industrial Automation: The DSP finds applications in industrial control systems for tasks like motor control, process monitoring, and data acquisition.
• Medical Devices: It can be utilized in medical equipment for tasks such as signal filtering, image processing, and patient monitoring.
• Automotive Electronics: The DSP can be integrated into automotive systems for tasks like engine control, audio processing, and driver assistance.

Detailed and Complete Alternative Models

• S-13D1C1828-B6T2U3: Similar to S-13D1C1828-A6T2U3 but with higher clock frequency and larger memory capacity.
• S-13D1C1828-A4T2U3: Similar to S-13D1C1828-A6T2U3 but with fewer I/O pins and smaller package size.
• S-13D1C1828-C6T2U3: Similar to S-13D1C1828-A6T2U3 but with additional built-in peripherals for specific applications.

Note: The above alternative models are just examples and not an exhaustive list.

This concludes the encyclopedia entry for S-13D1C1828-A6T2U3, providing a comprehensive overview of its product details, specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models.