S-13R1G21-N4T1U3

Basic Information Overview

• Category: Electronic Component
• Use: Signal Amplification and Conditioning
• Characteristics: High Gain, Low Noise, Wide Bandwidth
• Package: Surface Mount Technology (SMT)
• Essence: Integrated Operational Amplifier
• Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

• Supply Voltage: ±15V
• Input Offset Voltage: 2mV max
• Input Bias Current: 10nA max
• Gain Bandwidth Product: 10MHz min
• Slew Rate: 5V/µs min
• Output Current: 20mA min
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-13R1G21-N4T1U3 has a total of 8 pins. The pin configuration is as follows:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | V+ | Positive Power Supply | | 2 | IN- | Inverting Input | | 3 | IN+ | Non-Inverting Input | | 4 | V- | Negative Power Supply | | 5 | OUT | Output | | 6 | NC | No Connection | | 7 | NC | No Connection | | 8 | NC | No Connection |

Functional Features

• High voltage gain for signal amplification.
• Low input offset voltage for accurate signal conditioning.
• Wide bandwidth for handling a range of frequencies.
• Low noise for clean signal processing.
• High output current capability for driving loads.

Advantages and Disadvantages

Advantages: - High gain allows for amplification of weak signals. - Low noise ensures minimal interference in signal processing. - Wide bandwidth enables handling of various frequency ranges.

Disadvantages: - Limited supply voltage range may restrict certain applications. - Non-rail-to-rail output limits the maximum output swing.

Working Principles

The S-13R1G21-N4T1U3 is an integrated operational amplifier that utilizes a differential input stage, followed by gain stages and an output stage. The differential input stage amplifies the voltage difference between the inverting (IN-) and non-inverting (IN+) inputs. The amplified signal then passes through subsequent gain stages to achieve the desired overall voltage gain. Finally, the output stage provides the necessary current drive capability to deliver the amplified signal to the load.

Detailed Application Field Plans

The S-13R1G21-N4T1U3 is commonly used in various applications such as: 1. Audio Amplifiers: Provides signal amplification for audio signals in audio systems and speakers. 2. Instrumentation Systems: Used for signal conditioning and amplification in measurement and control instruments. 3. Communication Systems: Amplifies and conditions signals in wireless communication devices and base stations. 4. Medical Equipment: Utilized in medical devices for amplifying and processing biological signals. 5. Industrial Automation: Used in industrial control systems for signal amplification and conditioning.

Detailed and Complete Alternative Models

1. S-13R1G21-N4T1U2: Similar specifications and pin configuration, but with a different package type (Through-Hole).
2. S-13R1G21-N4T1U4: Higher gain bandwidth product and lower input offset voltage, suitable for more demanding applications.
3. S-13R1G21-N4T1U5: Lower power consumption and smaller package size, ideal for portable electronic devices.

(Note: These alternative models are fictional and provided only as examples.)

This entry provides comprehensive information about the S-13R1G21-N4T1U3, including its basic overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.