ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-812C23BMC-C4DT2G
Ətraflı Baxın Məlumat vərəqləri

S-812C23BMC-C4DT2G

Product Overview

Category

S-812C23BMC-C4DT2G belongs to the category of voltage regulators.

Use

This product is primarily used for voltage regulation in electronic circuits.

Characteristics

  • Package: The S-812C23BMC-C4DT2G comes in a compact surface-mount package.
  • Essence: It is a low-dropout voltage regulator with a fixed output voltage.
  • Packaging/Quantity: The product is typically packaged in reels or tubes, with varying quantities depending on the supplier.

Specifications

The specifications of the S-812C23BMC-C4DT2G are as follows:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.3V
  • Output Current: 150mA (maximum)
  • Dropout Voltage: 160mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-812C23BMC-C4DT2G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low Dropout Voltage: The S-812C23BMC-C4DT2G exhibits a low dropout voltage, ensuring efficient voltage regulation even when the input voltage is close to the desired output voltage.
  • Low Quiescent Current: With a low quiescent current, this voltage regulator minimizes power consumption during standby or idle modes.
  • Short Circuit Protection: The device incorporates short circuit protection, safeguarding the circuit from damage in case of a short circuit condition.

Advantages and Disadvantages

Advantages

  • Compact size and surface-mount package make it suitable for space-constrained applications.
  • Low dropout voltage ensures efficient voltage regulation.
  • Low quiescent current minimizes power consumption.

Disadvantages

  • Limited output current capacity (150mA maximum).
  • Fixed output voltage may not be suitable for all applications requiring variable output voltages.

Working Principles

The S-812C23BMC-C4DT2G operates based on the principle of a low-dropout voltage regulator. It regulates the input voltage to a fixed output voltage of 2.3V, ensuring a stable and reliable power supply for connected electronic circuits. The device achieves this by utilizing internal circuitry that adjusts the output voltage based on the input voltage and load conditions.

Detailed Application Field Plans

The S-812C23BMC-C4DT2G finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT (Internet of Things) devices - Embedded systems - Communication modules

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the S-812C23BMC-C4DT2G include: - S-812C25BMC-C4DT2G: Similar specifications with a slightly higher output voltage of 2.5V. - S-812C33BMC-C4DT2G: Similar specifications with a slightly higher output voltage of 3.3V. - S-812C12BMC-C4DT2G: Similar specifications with a lower output voltage of 1.2V.

These alternative models provide flexibility in choosing the appropriate output voltage for specific applications.

Word count: 400 words

Texniki həllərdə S-812C23BMC-C4DT2G tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-812C23BMC-C4DT2G in technical solutions:

  1. Q: What is the S-812C23BMC-C4DT2G? A: The S-812C23BMC-C4DT2G is a voltage regulator IC (integrated circuit) that provides stable power supply for various electronic devices.

  2. Q: What is the input voltage range of S-812C23BMC-C4DT2G? A: The input voltage range of S-812C23BMC-C4DT2G is typically between 2.5V and 16V.

  3. Q: What is the output voltage of S-812C23BMC-C4DT2G? A: The output voltage of S-812C23BMC-C4DT2G is fixed at 2.3V.

  4. Q: What is the maximum output current of S-812C23BMC-C4DT2G? A: The maximum output current of S-812C23BMC-C4DT2G is 150mA.

  5. Q: Can S-812C23BMC-C4DT2G be used in battery-powered applications? A: Yes, S-812C23BMC-C4DT2G can be used in battery-powered applications as it has low quiescent current and operates efficiently with low input voltages.

  6. Q: Is S-812C23BMC-C4DT2G suitable for automotive applications? A: Yes, S-812C23BMC-C4DT2G is suitable for automotive applications as it meets the AEC-Q100 automotive reliability standards.

  7. Q: Does S-812C23BMC-C4DT2G have built-in protection features? A: Yes, S-812C23BMC-C4DT2G has built-in protection features such as overcurrent protection and thermal shutdown.

  8. Q: Can S-812C23BMC-C4DT2G be used in space-constrained designs? A: Yes, S-812C23BMC-C4DT2G is available in a small SOT-23-5 package, making it suitable for space-constrained designs.

  9. Q: What is the operating temperature range of S-812C23BMC-C4DT2G? A: The operating temperature range of S-812C23BMC-C4DT2G is typically between -40°C and +85°C.

  10. Q: Are there any application notes or reference designs available for S-812C23BMC-C4DT2G? A: Yes, the manufacturer provides application notes and reference designs that can help in implementing S-812C23BMC-C4DT2G in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and consult with the manufacturer for detailed information.