S-812C25AMC-C2FT2G

Product Overview

Category

The S-812C25AMC-C2FT2G belongs to the category of voltage regulators.

Use

This product is primarily used for voltage regulation in electronic circuits.

Characteristics

• Package: The S-812C25AMC-C2FT2G comes in a compact surface-mount package.
• Essence: It is a low-dropout voltage regulator with a fixed output voltage.
• Packaging/Quantity: The product is typically packaged in reels and available in large quantities.

Specifications

The specifications of the S-812C25AMC-C2FT2G are as follows:

• Input Voltage Range: 2.5V - 6.0V
• Output Voltage: 2.5V
• Output Current: 150mA
• Dropout Voltage: 160mV (typical)
• Quiescent Current: 30µA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of the S-812C25AMC-C2FT2G is as follows:

1. VIN: Input voltage pin
2. GND: Ground pin
3. VOUT: Output voltage pin
4. CE: Chip enable pin

Functional Features

The S-812C25AMC-C2FT2G offers the following functional features:

• Low dropout voltage: The regulator maintains a stable output voltage even when the input voltage is close to the desired output voltage.
• Low quiescent current: The device consumes minimal current when in standby mode, resulting in power savings.
• Overcurrent protection: The regulator includes built-in protection against excessive current flow, safeguarding the circuitry.

Advantages and Disadvantages

Advantages: - Compact size and surface-mount package make it suitable for space-constrained applications. - Low dropout voltage ensures efficient voltage regulation. - Low quiescent current minimizes power consumption.

Disadvantages: - Limited output current capacity may not be suitable for high-power applications. - Fixed output voltage restricts flexibility in certain designs.

Working Principles

The S-812C25AMC-C2FT2G operates based on the principle of regulating the input voltage to maintain a stable output voltage. It utilizes a feedback mechanism to continuously adjust the internal circuitry, compensating for variations in the input voltage and load conditions.

Detailed Application Field Plans

The S-812C25AMC-C2FT2G finds application in various electronic devices and systems, including but not limited to:

1. Battery-powered devices: Portable electronics such as smartphones, tablets, and wearable devices benefit from the voltage regulation provided by this product.
2. IoT devices: Internet of Things (IoT) devices often operate on low voltages and require stable power supply, making the S-812C25AMC-C2FT2G suitable for such applications.
3. Industrial control systems: The regulator can be used in industrial control systems to ensure consistent voltage levels for reliable operation.

Detailed and Complete Alternative Models

1. S-812C25AMC-C4FT2G: Similar to the S-812C25AMC-C2FT2G, but with a different package type.
2. S-812C25AMC-C3FT2G: Offers a higher output current of 300mA while maintaining the same input and output voltage specifications.
3. S-812C25AMC-C1FT2G: Provides a lower output current of 100mA, suitable for low-power applications.

These alternative models offer similar functionality but with slight variations in specifications to cater to different requirements.

In conclusion, the S-812C25AMC-C2FT2G is a voltage regulator that provides stable output voltage in electronic circuits. Its compact size, low dropout voltage, and low quiescent current make it suitable for various applications. However, its limited output current capacity and fixed output voltage may restrict its use in certain designs.