S-812C26BMC-C4GT2G

Product Overview

Category

The S-812C26BMC-C4GT2G belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

• Package: The S-812C26BMC-C4GT2G comes in a small surface-mount package.
• Essence: This voltage regulator provides stable and reliable voltage output.
• Packaging/Quantity: It is typically packaged in reels or tubes, with varying quantities depending on the supplier.

Specifications

The specifications of the S-812C26BMC-C4GT2G are as follows:

• Input Voltage Range: 2.5V - 16V
• Output Voltage: 2.6V
• Output Current: 200mA
• Dropout Voltage: 160mV (typical)
• Quiescent Current: 30µA (typical)
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-812C26BMC-C4GT2G has the following pin configuration:

1. VIN: Input voltage pin
2. GND: Ground pin
3. VOUT: Output voltage pin
4. CE: Chip enable pin

Functional Features

• Low dropout voltage: The S-812C26BMC-C4GT2G exhibits a low dropout voltage, ensuring efficient power conversion even when the input voltage is close to the desired output voltage.
• Low quiescent current: With a low quiescent current, this voltage regulator minimizes power consumption during standby or idle modes.
• Overcurrent protection: The S-812C26BMC-C4GT2G incorporates overcurrent protection, safeguarding the circuit from excessive current flow.

Advantages and Disadvantages

Advantages

• Compact size: The small surface-mount package allows for space-saving integration in electronic devices.
• Stable voltage output: This voltage regulator provides a stable and reliable output voltage, ensuring consistent performance of connected components.

Disadvantages

• Limited output current: The S-812C26BMC-C4GT2G has a maximum output current of 200mA, which may not be sufficient for high-power applications.

Working Principles

The S-812C26BMC-C4GT2G operates based on the principle of linear voltage regulation. It utilizes a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. By maintaining a constant voltage drop across the pass transistor, the desired output voltage is achieved.

Detailed Application Field Plans

The S-812C26BMC-C4GT2G finds application in various electronic systems, including but not limited to:

1. Battery-powered devices: This voltage regulator can be used in portable electronics such as smartphones, tablets, and wearable devices to ensure stable power supply from the battery.
2. IoT devices: Internet of Things (IoT) devices often require regulated voltage for their sensors and communication modules. The S-812C26BMC-C4GT2G can be employed in these applications.
3. Automotive electronics: With its wide operating temperature range, this voltage regulator is suitable for automotive applications where temperature fluctuations are common.

Detailed and Complete Alternative Models

1. S-812C25BMC-C4GT2G: Similar to the S-812C26BMC-C4GT2G, but with an output voltage of 2.5V.
2. S-812C27BMC-C4GT2G: Similar to the S-812C26BMC-C4GT2G, but with an output voltage of 2.7V.
3. S-812C26BMC-C4GT2H: Similar to the S-812C26BMC-C4GT2G, but with an extended operating temperature range of -40°C to +105°C.

These alternative models provide similar functionality and characteristics, allowing users to choose the most suitable option for their specific requirements.

Word count: 470 words