ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-812C36BMC-C4QT2U
Ətraflı Baxın Məlumat vərəqləri

S-812C36BMC-C4QT2U

Product Overview

Category

The S-812C36BMC-C4QT2U belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit protection

Package

The S-812C36BMC-C4QT2U comes in a compact surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring the proper functioning of electronic devices.

Packaging/Quantity

The S-812C36BMC-C4QT2U is typically packaged in reels and is available in quantities of 1000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.6V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-812C36BMC-C4QT2U has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • High Precision Voltage Regulation: The S-812C36BMC-C4QT2U ensures accurate and stable output voltage, minimizing fluctuations and providing reliable performance.
  • Low Dropout Voltage: With a low dropout voltage of only 200mV, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Low Quiescent Current: The low quiescent current of 30µA helps conserve power and extends battery life in portable electronic devices.
  • Thermal Shutdown Protection: The regulator incorporates thermal shutdown protection, which prevents damage due to excessive heat by shutting down the output when the temperature exceeds a certain threshold.
  • Short-Circuit Protection: The S-812C36BMC-C4QT2U is equipped with short-circuit protection, safeguarding the circuit from potential damage caused by short-circuits.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures stable performance.
  • Low dropout voltage allows for efficient operation even with low input voltages.
  • Low quiescent current helps conserve power in battery-powered devices.
  • Thermal shutdown and short-circuit protection enhance reliability and safety.

Disadvantages

  • Limited output current capacity (up to 150mA).
  • Restricted input voltage range (2.5V - 6.0V).

Working Principles

The S-812C36BMC-C4QT2U operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. By comparing the output voltage with a reference voltage, the regulator adjusts the pass transistor to maintain a constant output voltage despite changes in the input voltage or load conditions.

Detailed Application Field Plans

The S-812C36BMC-C4QT2U finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

  1. S-812C33BMC-C4QT2U: Similar to S-812C36BMC-C4QT2U, but with an output voltage of 3.3V.
  2. S-812C50BMC-C4QT2U: Similar to S-812C36BMC-C4QT2U, but with an output voltage of 5.0V.
  3. S-812C18BMC-C4QT2U: Similar to S-812C36BMC-C4QT2U, but with an output voltage of 1.8V.

These alternative models provide similar functionality and characteristics, allowing for flexibility in choosing the appropriate voltage regulator for specific applications.

Word count: 511 words

Texniki həllərdə S-812C36BMC-C4QT2U tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-812C36BMC-C4QT2U in technical solutions:

  1. Q: What is the S-812C36BMC-C4QT2U? A: The S-812C36BMC-C4QT2U is a voltage regulator IC (integrated circuit) that provides a stable output voltage for various electronic devices.

  2. Q: What is the input voltage range of S-812C36BMC-C4QT2U? A: The input voltage range of S-812C36BMC-C4QT2U is typically between 2.5V and 16V.

  3. Q: What is the output voltage of S-812C36BMC-C4QT2U? A: The output voltage of S-812C36BMC-C4QT2U is fixed at 3.6V.

  4. Q: What is the maximum output current of S-812C36BMC-C4QT2U? A: The maximum output current of S-812C36BMC-C4QT2U is 150mA.

  5. Q: Can S-812C36BMC-C4QT2U be used in battery-powered applications? A: Yes, S-812C36BMC-C4QT2U can be used in battery-powered applications as it has low quiescent current consumption.

  6. Q: Is S-812C36BMC-C4QT2U suitable for automotive applications? A: Yes, S-812C36BMC-C4QT2U is suitable for automotive applications as it meets the AEC-Q100 automotive reliability standards.

  7. Q: Does S-812C36BMC-C4QT2U have built-in overcurrent protection? A: Yes, S-812C36BMC-C4QT2U has built-in overcurrent protection to safeguard against excessive current flow.

  8. Q: Can S-812C36BMC-C4QT2U operate in a wide temperature range? A: Yes, S-812C36BMC-C4QT2U can operate in a wide temperature range of -40°C to +105°C.

  9. Q: What package does S-812C36BMC-C4QT2U come in? A: S-812C36BMC-C4QT2U comes in a small and compact SOT-23-5 package.

  10. Q: Are there any application notes or reference designs available for S-812C36BMC-C4QT2U? A: Yes, the manufacturer provides application notes and reference designs that can help with the implementation of S-812C36BMC-C4QT2U in various technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and use cases. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.