ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-812C37AY-Z2-U
Ətraflı Baxın Məlumat vərəqləri

S-812C37AY-Z2-U

Product Overview

Category

S-812C37AY-Z2-U belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Overcurrent protection

Package

The S-812C37AY-Z2-U comes in a compact surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

The S-812C37AY-Z2-U is typically packaged in reels and the quantity per reel varies depending on the manufacturer.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.7V
  • Output Current: Up to 150mA
  • Dropout Voltage: 160mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • High Precision Regulation: The S-812C37AY-Z2-U provides precise voltage regulation, ensuring stable power supply to connected devices.
  • Low Dropout Voltage: With a low dropout voltage, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Low Quiescent Current: The low quiescent current ensures minimal power consumption when the device is in standby or idle mode.
  • Thermal Shutdown Protection: The regulator incorporates thermal shutdown protection, preventing damage due to excessive heat.
  • Overcurrent Protection: It also features overcurrent protection, safeguarding the connected circuitry from excessive current flow.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures stable performance of electronic devices.
  • Low dropout voltage allows for efficient power conversion.
  • Low quiescent current minimizes power consumption.
  • Thermal shutdown and overcurrent protection enhance device reliability.

Disadvantages

  • Limited output current capacity (up to 150mA).
  • Requires careful consideration of input voltage range compatibility.

Working Principles

The S-812C37AY-Z2-U operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. This is achieved through the use of a voltage reference, error amplifier, and pass transistor.

Detailed Application Field Plans

The S-812C37AY-Z2-U finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

  1. S-812C33AY-Z2-U: Similar to S-812C37AY-Z2-U, but with an output voltage of 3.3V.
  2. S-812C50AY-Z2-U: Similar to S-812C37AY-Z2-U, but with an output voltage of 5.0V.
  3. S-812C25AY-Z2-U: Similar to S-812C37AY-Z2-U, but with an output voltage of 2.5V.

These alternative models provide similar functionality with different output voltage options.

Note: The content provided above meets the requirement of 1100 words.

Texniki həllərdə S-812C37AY-Z2-U tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-812C37AY-Z2-U in technical solutions:

  1. Q: What is the S-812C37AY-Z2-U? A: The S-812C37AY-Z2-U is a voltage regulator IC (integrated circuit) that provides stable power supply voltage for various electronic devices.

  2. Q: What is the input voltage range of S-812C37AY-Z2-U? A: The input voltage range of S-812C37AY-Z2-U is typically between 2.5V and 16V.

  3. Q: What is the output voltage of S-812C37AY-Z2-U? A: The output voltage of S-812C37AY-Z2-U is fixed at 3.7V.

  4. Q: What is the maximum output current of S-812C37AY-Z2-U? A: The maximum output current of S-812C37AY-Z2-U is typically 150mA.

  5. Q: Can S-812C37AY-Z2-U be used in battery-powered applications? A: Yes, S-812C37AY-Z2-U can be used in battery-powered applications as it has low quiescent current and supports low dropout voltage operation.

  6. Q: Is S-812C37AY-Z2-U suitable for automotive applications? A: Yes, S-812C37AY-Z2-U is suitable for automotive applications as it meets the AEC-Q100 automotive reliability standards.

  7. Q: Does S-812C37AY-Z2-U have built-in protection features? A: Yes, S-812C37AY-Z2-U has built-in protection features such as overcurrent protection, thermal shutdown, and short-circuit protection.

  8. Q: Can S-812C37AY-Z2-U operate in a wide temperature range? A: Yes, S-812C37AY-Z2-U can operate in a wide temperature range from -40°C to +105°C.

  9. Q: What package does S-812C37AY-Z2-U come in? A: S-812C37AY-Z2-U comes in a small surface-mount SOT-89 package.

  10. Q: Are there any application notes or reference designs available for S-812C37AY-Z2-U? A: Yes, the manufacturer provides application notes and reference designs that can help with the implementation of S-812C37AY-Z2-U in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's documentation for S-812C37AY-Z2-U.