ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-812C38BMC-C4ST2G
Ətraflı Baxın Məlumat vərəqləri

S-812C38BMC-C4ST2G

Product Overview

Category

The S-812C38BMC-C4ST2G belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Overcurrent protection

Package

The S-812C38BMC-C4ST2G comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

The S-812C38BMC-C4ST2G is typically packaged in reels and is available in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.8V
  • Output Current: 150mA
  • Dropout Voltage: 160mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-812C38BMC-C4ST2G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • High precision voltage regulation ensures stable output voltage.
  • Low dropout voltage allows for efficient power conversion.
  • Low quiescent current minimizes power consumption when the device is idle.
  • Thermal shutdown protection prevents damage due to excessive heat.
  • Overcurrent protection safeguards against excessive current flow.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures reliable performance.
  • Low dropout voltage enables efficient power conversion.
  • Thermal shutdown and overcurrent protection enhance device safety.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Narrow input voltage range restricts compatibility with certain systems.

Working Principles

The S-812C38BMC-C4ST2G operates based on the principle of a linear voltage regulator. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, regardless of changes in the input voltage or load conditions.

Detailed Application Field Plans

The S-812C38BMC-C4ST2G finds application in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

  1. S-812C33BMC-C4ST2G: Output Voltage - 3.3V, Output Current - 150mA
  2. S-812C50BMC-C4ST2G: Output Voltage - 5.0V, Output Current - 150mA
  3. S-812C18BMC-C4ST2G: Output Voltage - 1.8V, Output Current - 150mA
  4. S-812C25BMC-C4ST2G: Output Voltage - 2.5V, Output Current - 150mA

These alternative models offer different output voltages while maintaining similar characteristics and features as the S-812C38BMC-C4ST2G.

In conclusion, the S-812C38BMC-C4ST2G is a voltage regulator that provides stable and regulated voltage for electronic circuits. Its high precision, low dropout voltage, and various protection features make it suitable for a wide range of applications. However, its limited output current and narrow input voltage range should be considered when selecting alternative models for specific requirements.

Texniki həllərdə S-812C38BMC-C4ST2G tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-812C38BMC-C4ST2G in technical solutions:

  1. Q: What is the S-812C38BMC-C4ST2G? A: The S-812C38BMC-C4ST2G is a voltage regulator IC (integrated circuit) that provides a stable output voltage for various electronic devices.

  2. Q: What is the input voltage range of S-812C38BMC-C4ST2G? A: The input voltage range of S-812C38BMC-C4ST2G is typically between 2.5V and 16V.

  3. Q: What is the output voltage of S-812C38BMC-C4ST2G? A: The output voltage of S-812C38BMC-C4ST2G is fixed at 3.8V.

  4. Q: What is the maximum output current of S-812C38BMC-C4ST2G? A: The maximum output current of S-812C38BMC-C4ST2G is 150mA.

  5. Q: Can S-812C38BMC-C4ST2G be used in battery-powered applications? A: Yes, S-812C38BMC-C4ST2G can be used in battery-powered applications as it has low quiescent current consumption.

  6. Q: Is S-812C38BMC-C4ST2G suitable for automotive applications? A: Yes, S-812C38BMC-C4ST2G is suitable for automotive applications as it meets the AEC-Q100 automotive reliability standards.

  7. Q: Does S-812C38BMC-C4ST2G have built-in overcurrent protection? A: Yes, S-812C38BMC-C4ST2G has built-in overcurrent protection to safeguard against excessive current flow.

  8. Q: Can S-812C38BMC-C4ST2G operate in a wide temperature range? A: Yes, S-812C38BMC-C4ST2G can operate in a wide temperature range from -40°C to +105°C.

  9. Q: What package does S-812C38BMC-C4ST2G come in? A: S-812C38BMC-C4ST2G is available in a small SOT-23-5 package.

  10. Q: Are there any application notes or reference designs available for S-812C38BMC-C4ST2G? A: Yes, the manufacturer provides application notes and reference designs that can help with the implementation of S-812C38BMC-C4ST2G in various technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and consult with the manufacturer for accurate information.