ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-812C40AY-B2-U
Ətraflı Baxın Məlumat vərəqləri

S-812C40AY-B2-U

Product Overview

Category

The S-812C40AY-B2-U belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit protection

Package

The S-812C40AY-B2-U comes in a compact surface-mount package, making it suitable for space-constrained applications.

Essence

The essence of this product lies in its ability to provide stable and reliable voltage regulation, ensuring proper functioning of electronic devices.

Packaging/Quantity

The S-812C40AY-B2-U is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.0V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-812C40AY-B2-U has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • High Precision Regulation: The S-812C40AY-B2-U provides precise voltage regulation, ensuring stable output voltage even under varying load conditions.
  • Low Dropout Voltage: With a low dropout voltage of only 200mV, this regulator can operate efficiently even when the input voltage is close to the desired output voltage.
  • Low Quiescent Current: The low quiescent current of 30µA minimizes power consumption, making it suitable for battery-powered applications.
  • Thermal Shutdown Protection: The device incorporates thermal shutdown protection, preventing damage due to excessive temperature.
  • Short-Circuit Protection: The S-812C40AY-B2-U includes short-circuit protection, safeguarding the regulator and connected components from potential damage.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures stable output.
  • Low dropout voltage allows efficient operation even with low input voltages.
  • Low quiescent current minimizes power consumption.
  • Thermal shutdown protection prevents overheating.
  • Short-circuit protection safeguards against damage.

Disadvantages

  • Limited output current capacity (up to 150mA).
  • Restricted input voltage range (2.5V - 6.0V).

Working Principles

The S-812C40AY-B2-U operates based on a voltage reference and feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. By continuously monitoring the load conditions, the regulator compensates for any fluctuations, ensuring a stable output.

Detailed Application Field Plans

The S-812C40AY-B2-U finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Communication equipment

Detailed and Complete Alternative Models

  1. S-812C33AY-B2-U: Output Voltage - 3.3V, Output Current - Up to 150mA
  2. S-812C50AY-B2-U: Output Voltage - 5.0V, Output Current - Up to 150mA
  3. S-812C25AY-B2-U: Output Voltage - 2.5V, Output Current - Up to 150mA

These alternative models offer different output voltage options while maintaining similar characteristics and features as the S-812C40AY-B2-U.

In conclusion, the S-812C40AY-B2-U is a voltage regulator that provides high precision voltage regulation, low dropout voltage, and low quiescent current. It offers thermal shutdown and short-circuit protection, making it suitable for various electronic applications. While it has limitations in terms of output current capacity and input voltage range, there are alternative models available with different output voltage options.

Texniki həllərdə S-812C40AY-B2-U tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-812C40AY-B2-U in technical solutions:

  1. Q: What is the S-812C40AY-B2-U? A: The S-812C40AY-B2-U is a voltage regulator IC (integrated circuit) that provides a stable output voltage for various electronic devices.

  2. Q: What is the input voltage range of the S-812C40AY-B2-U? A: The input voltage range of the S-812C40AY-B2-U is typically between 2.5V and 16V.

  3. Q: What is the output voltage of the S-812C40AY-B2-U? A: The S-812C40AY-B2-U has a fixed output voltage of 4.0V.

  4. Q: What is the maximum output current of the S-812C40AY-B2-U? A: The maximum output current of the S-812C40AY-B2-U is 150mA.

  5. Q: Can the S-812C40AY-B2-U be used in battery-powered applications? A: Yes, the S-812C40AY-B2-U can be used in battery-powered applications as it has a low quiescent current and operates efficiently with low input voltages.

  6. Q: Is the S-812C40AY-B2-U suitable for automotive applications? A: Yes, the S-812C40AY-B2-U is designed to meet automotive standards and can be used in automotive applications.

  7. Q: Does the S-812C40AY-B2-U have built-in protection features? A: Yes, the S-812C40AY-B2-U includes overcurrent protection, thermal shutdown, and short-circuit protection.

  8. Q: Can the S-812C40AY-B2-U operate in a wide temperature range? A: Yes, the S-812C40AY-B2-U can operate in a temperature range of -40°C to +105°C.

  9. Q: What is the package type of the S-812C40AY-B2-U? A: The S-812C40AY-B2-U is available in a small SOT-89 package.

  10. Q: Are there any application notes or reference designs available for the S-812C40AY-B2-U? A: Yes, the manufacturer provides application notes and reference designs that can help with the implementation of the S-812C40AY-B2-U in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It is always recommended to refer to the datasheet and consult the manufacturer for detailed information.