ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-814A20AUC-BCKT2G
Ətraflı Baxın Məlumat vərəqləri

S-814A20AUC-BCKT2G

Product Overview

Category

S-814A20AUC-BCKT2G belongs to the category of voltage regulators.

Use

This product is used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High precision
  • Low power consumption
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

The S-814A20AUC-BCKT2G comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring proper functioning of electronic devices.

Packaging/Quantity

The S-814A20AUC-BCKT2G is typically packaged in reels or tape and reel packaging. The quantity per reel is 3000 units.

Specifications

  • Input Voltage Range: 2.5V to 18V
  • Output Voltage: 2.0V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Line Regulation: ±0.05% (typical)
  • Load Regulation: ±0.3% (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin
  5. NC: No connection pin

Functional Features

  • Voltage regulation: The S-814A20AUC-BCKT2G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices from excessive current flow.
  • Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic devices.
  • High precision ensures accurate voltage regulation.
  • Low power consumption helps conserve energy.
  • Wide input voltage range makes it suitable for a variety of applications.
  • Overcurrent and thermal shutdown protection enhance device safety.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

The S-814A20AUC-BCKT2G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage despite changes in the input voltage or load conditions.

Detailed Application Field Plans

The S-814A20AUC-BCKT2G finds application in various electronic devices, including: 1. Mobile phones 2. Portable media players 3. Digital cameras 4. Wireless communication devices 5. Battery-powered devices

Detailed and Complete Alternative Models

  1. S-812C30AUC-C2K-T2: Similar voltage regulator with a higher output current of 300mA.
  2. S-817A33ANB-CUPT2G: Voltage regulator with a fixed output voltage of 3.3V.
  3. S-808CCT-I6T1U: Voltage regulator with an adjustable output voltage range.

These alternative models offer different specifications and features to cater to diverse application requirements.

Word count: 491 words

Texniki həllərdə S-814A20AUC-BCKT2G tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-814A20AUC-BCKT2G in technical solutions:

  1. Q: What is the purpose of S-814A20AUC-BCKT2G in technical solutions? A: S-814A20AUC-BCKT2G is a voltage detector IC that can be used to monitor power supply voltages and provide accurate detection signals.

  2. Q: What is the operating voltage range of S-814A20AUC-BCKT2G? A: The operating voltage range of S-814A20AUC-BCKT2G is typically between 1.6V and 6.0V.

  3. Q: How does S-814A20AUC-BCKT2G detect voltage levels? A: S-814A20AUC-BCKT2G uses an internal voltage reference and a comparator to detect whether the input voltage is above or below a certain threshold.

  4. Q: Can S-814A20AUC-BCKT2G be used in battery-powered applications? A: Yes, S-814A20AUC-BCKT2G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.5µA.

  5. Q: What is the output configuration of S-814A20AUC-BCKT2G? A: S-814A20AUC-BCKT2G has an open-drain output configuration, which allows for easy integration with other digital circuits.

  6. Q: Is S-814A20AUC-BCKT2G suitable for overvoltage protection? A: No, S-814A20AUC-BCKT2G is not designed for overvoltage protection. It is primarily used for voltage monitoring and detection.

  7. Q: Can S-814A20AUC-BCKT2G be used in automotive applications? A: Yes, S-814A20AUC-BCKT2G is suitable for automotive applications as it can operate within the specified temperature range of -40°C to +105°C.

  8. Q: What is the response time of S-814A20AUC-BCKT2G? A: The response time of S-814A20AUC-BCKT2G is typically 300µs, which allows for fast detection of voltage changes.

  9. Q: Does S-814A20AUC-BCKT2G have any built-in hysteresis? A: Yes, S-814A20AUC-BCKT2G has a built-in hysteresis of typically 50mV, which helps to prevent false triggering due to voltage fluctuations.

  10. Q: Can multiple S-814A20AUC-BCKT2G devices be connected together? A: Yes, multiple S-814A20AUC-BCKT2G devices can be connected together to monitor different voltage levels or provide redundancy in critical applications.

Please note that these answers are general and may vary depending on the specific application and requirements.