ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-817A19ANB-CUIT2G
Ətraflı Baxın Məlumat vərəqləri

S-817A19ANB-CUIT2G

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics:
    • Low dropout voltage
    • High output voltage accuracy
    • Low quiescent current
    • Small package size
  • Package: SOT-23-5
  • Essence: Voltage regulator IC
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Input Voltage Range: 2.0V to 6.0V
  • Output Voltage Range: 1.8V to 5.0V
  • Dropout Voltage: 200mV (typical) at 100mA load current
  • Output Current: 100mA (maximum)
  • Quiescent Current: 30µA (typical)
  • Line Regulation: ±0.05% (typical)
  • Load Regulation: ±0.3% (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-817A19ANB-CUIT2G has a total of five pins arranged as follows:

```

| | --|----|-- |____| ```

Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: NC (No Connection) Pin 4: VOUT (Output Voltage) Pin 5: CE (Control Enable)

Functional Features

  • Low dropout voltage ensures stable output even with low input voltage.
  • High output voltage accuracy provides precise voltage regulation.
  • Low quiescent current minimizes power consumption in standby mode.
  • Small package size allows for space-efficient designs.

Advantages

  • Reliable voltage regulation for various applications.
  • Wide input voltage range enables flexibility in power supply design.
  • Low dropout voltage ensures efficient power conversion.
  • Small package size saves board space.

Disadvantages

  • Limited output current capability (maximum 100mA).
  • No thermal shutdown feature, which may lead to overheating if not properly managed.

Working Principles

The S-817A19ANB-CUIT2G is a voltage regulator IC that maintains a stable output voltage regardless of input voltage fluctuations. It utilizes a feedback mechanism to continuously adjust the internal circuitry and keep the output voltage within the specified range. The low dropout voltage allows for efficient power conversion, while the low quiescent current minimizes power consumption when the device is in standby mode.

Detailed Application Field Plans

The S-817A19ANB-CUIT2G is commonly used in various electronic devices that require a stable and regulated power supply. Some typical application fields include: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

  • S-817A18ANB-CUIT2G: Similar specifications but with an output voltage range of 1.8V to 4.5V.
  • S-817A20ANB-CUIT2G: Similar specifications but with an output voltage range of 2.0V to 5.5V.
  • S-817A25ANB-CUIT2G: Similar specifications but with an output voltage range of 2.5V to 6.0V.

These alternative models provide options for different output voltage requirements while maintaining similar characteristics and package sizes.

Word count: 346 words

Texniki həllərdə S-817A19ANB-CUIT2G tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-817A19ANB-CUIT2G in technical solutions:

  1. Q: What is the S-817A19ANB-CUIT2G? A: The S-817A19ANB-CUIT2G is a voltage detector IC (integrated circuit) manufactured by a specific company.

  2. Q: What is the purpose of the S-817A19ANB-CUIT2G? A: The purpose of this IC is to monitor and detect voltage levels in electronic circuits.

  3. Q: What voltage range does the S-817A19ANB-CUIT2G support? A: The S-817A19ANB-CUIT2G supports a voltage range of X volts to Y volts (specify the actual range).

  4. Q: How does the S-817A19ANB-CUIT2G provide voltage detection? A: This IC provides voltage detection by comparing the input voltage with a reference voltage internally set within the IC.

  5. Q: Can the S-817A19ANB-CUIT2G be used in battery-powered applications? A: Yes, the S-817A19ANB-CUIT2G can be used in battery-powered applications as it has low power consumption.

  6. Q: What is the output format of the S-817A19ANB-CUIT2G? A: The S-817A19ANB-CUIT2G provides an open-drain output, which means it can sink current but cannot source current.

  7. Q: Is the S-817A19ANB-CUIT2G suitable for automotive applications? A: Yes, the S-817A19ANB-CUIT2G is suitable for automotive applications as it meets the required standards and has a wide operating temperature range.

  8. Q: Can the S-817A19ANB-CUIT2G be used in high-voltage applications? A: No, the S-817A19ANB-CUIT2G is not suitable for high-voltage applications as it has a maximum voltage rating of Z volts (specify the actual value).

  9. Q: Does the S-817A19ANB-CUIT2G have built-in hysteresis? A: Yes, the S-817A19ANB-CUIT2G has built-in hysteresis to prevent output oscillation near the detection threshold.

  10. Q: What are some typical applications of the S-817A19ANB-CUIT2G? A: The S-817A19ANB-CUIT2G is commonly used in power management systems, battery monitoring circuits, and various electronic devices requiring voltage detection.

Please note that the answers provided above are general and may vary depending on the specific datasheet and application requirements of the S-817A19ANB-CUIT2G.