ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-817A26ANB-CUPT2G
Ətraflı Baxın Məlumat vərəqləri

S-817A26ANB-CUPT2G

Product Overview

Category

The S-817A26ANB-CUPT2G belongs to the category of voltage regulators.

Use

This product is commonly used for voltage regulation in various electronic devices and circuits.

Characteristics

  • Input Voltage Range: 1.8V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Maximum Output Current: 150mA
  • Low Quiescent Current: 1.0µA (typ.)
  • High Ripple Rejection: 70dB (typ.)
  • Low Dropout Voltage: 160mV (typ.)

Package

The S-817A26ANB-CUPT2G is available in a small surface-mount package, specifically the SOT-23-5 package.

Essence

This voltage regulator provides stable and regulated output voltage, ensuring proper functioning of electronic devices.

Packaging/Quantity

The S-817A26ANB-CUPT2G is typically packaged in reels containing 3000 units per reel.

Specifications

  • Input Voltage Range: 1.8V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Maximum Output Current: 150mA
  • Quiescent Current: 1.0µA (typ.)
  • Dropout Voltage: 160mV (typ.)
  • Ripple Rejection: 70dB (typ.)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-817A26ANB-CUPT2G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)
  4. CE (Chip Enable)
  5. NC (No Connection)

Functional Features

  • Low quiescent current ensures minimal power consumption when the device is in standby mode.
  • High ripple rejection capability reduces noise and interference in the output voltage.
  • Wide input voltage range allows for flexibility in various applications.
  • Low dropout voltage enables efficient regulation even with small input-output voltage differentials.

Advantages and Disadvantages

Advantages

  • Low power consumption in standby mode
  • Excellent ripple rejection
  • Wide input voltage range
  • Small package size

Disadvantages

  • Limited maximum output current (150mA)
  • Relatively high dropout voltage

Working Principles

The S-817A26ANB-CUPT2G operates as a linear voltage regulator. It uses a reference voltage to compare against the input voltage and adjusts the output voltage accordingly. The internal circuitry ensures stable and regulated output voltage, even with varying input voltages.

Detailed Application Field Plans

The S-817A26ANB-CUPT2G finds application in various electronic devices and circuits that require precise voltage regulation. Some common application fields include:

  1. Battery-powered devices: Ensures consistent voltage supply to sensitive components.
  2. Mobile phones and tablets: Regulates voltage for efficient operation of internal components.
  3. IoT devices: Provides stable voltage for sensors and communication modules.
  4. Automotive electronics: Maintains proper voltage levels for various systems.

Detailed and Complete Alternative Models

  1. S-817A25ANB-CUPT2G: Similar specifications but with a lower dropout voltage.
  2. S-817A27ANB-CUPT2G: Similar specifications but with a higher maximum output current.
  3. S-817A24ANB-CUPT2G: Similar specifications but with a wider input voltage range.

These alternative models offer similar functionality and can be considered based on specific requirements.

Word count: 446 words

Texniki həllərdə S-817A26ANB-CUPT2G tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-817A26ANB-CUPT2G in technical solutions:

1. What is the S-817A26ANB-CUPT2G? - The S-817A26ANB-CUPT2G is a voltage detector IC (integrated circuit) manufactured by a specific company.

2. What is the purpose of the S-817A26ANB-CUPT2G? - The purpose of this IC is to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

3. What is the operating voltage range of the S-817A26ANB-CUPT2G? - The operating voltage range of this IC is typically between 1.6V and 6.0V.

4. How does the S-817A26ANB-CUPT2G detect voltage levels? - It uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold.

5. What is the output format of the S-817A26ANB-CUPT2G? - The output is typically an open-drain or push-pull type, depending on the specific variant.

6. Can the S-817A26ANB-CUPT2G be used in battery-powered applications? - Yes, it can be used in battery-powered applications as long as the operating voltage range is within the specified limits.

7. Is the S-817A26ANB-CUPT2G suitable for automotive applications? - Yes, this IC is designed to meet automotive standards and can be used in automotive applications.

8. Does the S-817A26ANB-CUPT2G have any built-in protection features? - Yes, it typically includes features like overcurrent protection and thermal shutdown to ensure safe operation.

9. Can multiple S-817A26ANB-CUPT2G ICs be used in parallel? - Yes, multiple ICs can be used in parallel to monitor different voltage levels or provide redundancy.

10. What is the package type of the S-817A26ANB-CUPT2G? - The S-817A26ANB-CUPT2G is available in a small surface-mount package, such as SOT-23-5 or similar.

Please note that the specific details may vary depending on the manufacturer's datasheet and product variant.