ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-817A26ANB-CUPT2U
Ətraflı Baxın Məlumat vərəqləri

S-817A26ANB-CUPT2U

Product Overview

Category

S-817A26ANB-CUPT2U belongs to the category of voltage regulators.

Use

This product is primarily used for voltage regulation in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Low power consumption
  • Compact size
  • High reliability

Package

The S-817A26ANB-CUPT2U comes in a small surface-mount package, making it suitable for space-constrained applications.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output to ensure proper functioning of electronic devices.

Packaging/Quantity

The S-817A26ANB-CUPT2U is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.6V
  • Output Current: 50mA
  • Dropout Voltage: 160mV (typical)
  • Quiescent Current: 1µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-817A26ANB-CUPT2U has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage ensures efficient voltage regulation even with low input voltages.
  • Ultra-low quiescent current minimizes power consumption, making it suitable for battery-powered applications.
  • Built-in overcurrent protection safeguards the circuit from excessive current flow.
  • Thermal shutdown feature protects the device from overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact electronic devices.
  • High reliability ensures long-term performance and durability.
  • Low power consumption extends battery life in portable applications.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Narrow input voltage range restricts compatibility with certain systems.

Working Principles

The S-817A26ANB-CUPT2U operates based on the principle of a linear voltage regulator. It regulates the output voltage by adjusting the resistance within the device to maintain a constant voltage level, regardless of variations in the input voltage.

Detailed Application Field Plans

The S-817A26ANB-CUPT2U finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT devices - Battery-powered equipment

Detailed and Complete Alternative Models

  1. S-817A25ANB-CUPT2U: Similar to S-817A26ANB-CUPT2U, but with an output voltage of 2.5V.
  2. S-817A27ANB-CUPT2U: Similar to S-817A26ANB-CUPT2U, but with an output voltage of 2.7V.
  3. S-817A28ANB-CUPT2U: Similar to S-817A26ANB-CUPT2U, but with an output voltage of 2.8V.

These alternative models provide flexibility in choosing the desired output voltage for specific applications.

In conclusion, the S-817A26ANB-CUPT2U is a voltage regulator that offers stable voltage output, low power consumption, and high reliability. Its small form factor and various protective features make it suitable for a wide range of electronic devices. However, its limited output current and narrow input voltage range should be considered when selecting this product for specific applications.

Texniki həllərdə S-817A26ANB-CUPT2U tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-817A26ANB-CUPT2U in technical solutions:

  1. Q: What is the S-817A26ANB-CUPT2U? A: The S-817A26ANB-CUPT2U is a voltage detector IC (integrated circuit) manufactured by a specific company.

  2. Q: What is the purpose of the S-817A26ANB-CUPT2U? A: The purpose of this IC is to monitor and detect voltage levels in electronic circuits or systems.

  3. Q: What voltage range does the S-817A26ANB-CUPT2U support? A: The S-817A26ANB-CUPT2U supports a voltage range of X volts to Y volts (specify the actual range).

  4. Q: How does the S-817A26ANB-CUPT2U provide voltage detection? A: This IC provides voltage detection by comparing the input voltage with a reference voltage internally set within the IC.

  5. Q: Can the S-817A26ANB-CUPT2U be used in battery-powered applications? A: Yes, the S-817A26ANB-CUPT2U can be used in battery-powered applications as it has low power consumption.

  6. Q: What is the output format of the S-817A26ANB-CUPT2U? A: The S-817A26ANB-CUPT2U provides an open-drain output, which means it can sink current but not source current.

  7. Q: Is the S-817A26ANB-CUPT2U suitable for automotive applications? A: Yes, the S-817A26ANB-CUPT2U is suitable for automotive applications as it can withstand high temperatures and has automotive-grade certifications.

  8. Q: Can the S-817A26ANB-CUPT2U be used in industrial control systems? A: Absolutely, the S-817A26ANB-CUPT2U is commonly used in industrial control systems due to its reliability and accuracy.

  9. Q: Does the S-817A26ANB-CUPT2U have any built-in protection features? A: Yes, this IC has built-in overvoltage protection, undervoltage lockout, and hysteresis to ensure stable operation.

  10. Q: What package does the S-817A26ANB-CUPT2U come in? A: The S-817A26ANB-CUPT2U comes in a specific package type (e.g., SOT-23-5) for easy integration into various circuit designs.

Please note that the answers provided above are general and may vary depending on the specific datasheet and application requirements of the S-817A26ANB-CUPT2U.