ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-817A38ANB-CVBT2G
Ətraflı Baxın Məlumat vərəqləri

S-817A38ANB-CVBT2G

Product Overview

Category

S-817A38ANB-CVBT2G belongs to the category of voltage regulators.

Use

This product is primarily used for voltage regulation in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit protection

Package

The S-817A38ANB-CVBT2G comes in a compact surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring the proper functioning of electronic devices.

Packaging/Quantity

The S-817A38ANB-CVBT2G is typically packaged in reels and is available in quantities suitable for both small-scale and large-scale production.

Specifications

  • Input Voltage Range: 2.0V to 6.0V
  • Output Voltage: 3.8V
  • Output Current: Up to 150mA
  • Dropout Voltage: 100mV (typical)
  • Quiescent Current: 1.0µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-817A38ANB-CVBT2G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • High Precision Voltage Regulation: The S-817A38ANB-CVBT2G ensures accurate and stable output voltage, minimizing fluctuations and ensuring reliable performance of connected devices.
  • Low Dropout Voltage: With a low dropout voltage, this regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Low Quiescent Current: The low quiescent current ensures minimal power consumption when the regulator is in standby or idle mode.
  • Thermal Shutdown Protection: The device incorporates thermal shutdown protection, preventing damage due to excessive heat.
  • Short-Circuit Protection: The S-817A38ANB-CVBT2G includes short-circuit protection, safeguarding the circuit from potential damage in case of a short circuit.

Advantages and Disadvantages

Advantages

  • High precision voltage regulation ensures reliable performance.
  • Low dropout voltage allows for efficient operation even with low input voltages.
  • Low quiescent current minimizes power consumption.
  • Thermal shutdown protection prevents overheating.
  • Short-circuit protection safeguards the circuit.

Disadvantages

  • Limited output current capacity (up to 150mA).
  • Restricted input voltage range (2.0V to 6.0V).

Working Principles

The S-817A38ANB-CVBT2G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any variations in the input voltage or load conditions.

Detailed Application Field Plans

The S-817A38ANB-CVBT2G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

  1. S-817A33ANB-CVBT2G: Output voltage of 3.3V, otherwise similar specifications.
  2. S-817A50ANB-CVBT2G: Output voltage of 5.0V, otherwise similar specifications.
  3. S-817A18ANB-CVBT2G: Output voltage of 1.8V, otherwise similar specifications.
  4. S-817A25ANB-CVBT2G: Output voltage of 2.5V, otherwise similar specifications.

These alternative models provide different output voltages while maintaining similar characteristics and functionality to the S-817A38ANB-CVBT2G.

Word count: 496 words

Texniki həllərdə S-817A38ANB-CVBT2G tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-817A38ANB-CVBT2G in technical solutions:

1. What is the S-817A38ANB-CVBT2G? - The S-817A38ANB-CVBT2G is a voltage detector IC (integrated circuit) manufactured by a specific company.

2. What is the purpose of the S-817A38ANB-CVBT2G? - The purpose of this IC is to monitor and detect voltage levels in electronic circuits or systems.

3. What is the operating voltage range of the S-817A38ANB-CVBT2G? - The operating voltage range of this IC is typically between 1.6V and 6.0V.

4. How does the S-817A38ANB-CVBT2G work? - This IC works by comparing the input voltage with a fixed reference voltage, and when the input voltage crosses a certain threshold, it triggers an output signal.

5. What is the output type of the S-817A38ANB-CVBT2G? - The output type of this IC is an open-drain output.

6. What is the maximum current that can be sunk by the S-817A38ANB-CVBT2G? - The maximum current that can be sunk by this IC is typically around 50mA.

7. Can the S-817A38ANB-CVBT2G be used for overvoltage protection? - No, this IC is primarily designed for undervoltage detection and does not provide overvoltage protection.

8. Is the S-817A38ANB-CVBT2G suitable for automotive applications? - Yes, this IC is suitable for automotive applications as it meets the necessary standards and requirements.

9. Can multiple S-817A38ANB-CVBT2G ICs be used in parallel? - Yes, multiple ICs can be used in parallel to monitor different voltage levels or provide redundancy.

10. What are some typical applications of the S-817A38ANB-CVBT2G? - Some typical applications include battery-powered devices, power management systems, and low-voltage detection circuits.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of the S-817A38ANB-CVBT2G IC.