ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-817B12AMC-CWBT2G
Ətraflı Baxın Məlumat vərəqləri

S-817B12AMC-CWBT2G

Product Overview

Category

The S-817B12AMC-CWBT2G belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation: The S-817B12AMC-CWBT2G provides a stable output voltage, ensuring reliable operation of connected devices.
  • Low power consumption: This voltage regulator consumes minimal power, making it suitable for energy-efficient applications.
  • Compact package: The S-817B12AMC-CWBT2G is available in a small package, allowing for space-saving integration into various electronic designs.
  • High accuracy: It offers precise voltage regulation, ensuring consistent performance of connected components.

Package

The S-817B12AMC-CWBT2G is typically packaged in a compact surface-mount package, which facilitates easy installation on printed circuit boards (PCBs).

Essence

The essence of the S-817B12AMC-CWBT2G lies in its ability to provide stable and regulated voltage output, ensuring the proper functioning of electronic devices.

Packaging/Quantity

This product is usually supplied in reels or tape and reel packaging, with a standard quantity of 3000 units per reel.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 1.2V
  • Output current: Up to 50mA
  • Dropout voltage: 150mV (typical)
  • Operating temperature range: -40°C to +85°C
  • Quiescent current: 30μA (typical)

Detailed Pin Configuration

The S-817B12AMC-CWBT2G has the following pin configuration:

  1. VIN (Input voltage)
  2. GND (Ground)
  3. VOUT (Output voltage)

Functional Features

  • Low dropout voltage: The S-817B12AMC-CWBT2G maintains a low dropout voltage, ensuring efficient power conversion even when the input voltage is close to the desired output voltage.
  • Overcurrent protection: This voltage regulator incorporates overcurrent protection, safeguarding connected devices from excessive current flow.
  • Thermal shutdown: In case of excessive temperature rise, the S-817B12AMC-CWBT2G activates thermal shutdown to prevent damage to the device and surrounding components.

Advantages and Disadvantages

Advantages

  • High accuracy voltage regulation
  • Low power consumption
  • Compact package size
  • Overcurrent protection
  • Thermal shutdown feature

Disadvantages

  • Limited output current capacity (up to 50mA)
  • Restricted input voltage range (2.5V - 6.0V)

Working Principles

The S-817B12AMC-CWBT2G operates based on a voltage reference and feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any variations in the input voltage or load conditions.

Detailed Application Field Plans

The S-817B12AMC-CWBT2G finds applications in various electronic systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

  1. S-817A12AMC-CWBT2G: Similar to the S-817B12AMC-CWBT2G, but with an output voltage of 1.2V and a higher output current capacity of up to 100mA.
  2. S-817B10AMC-CWBT2G: Offers the same output voltage of 1.2V but with a lower dropout voltage and higher input voltage range (2.0V - 6.5V).
  3. S-817B15AMC-CWBT2G: Provides an output voltage of 1.5V, suitable for applications requiring a slightly higher voltage level.

These alternative models offer similar functionality to the S-817B12AMC-CWBT2G but may have different specifications to meet specific application requirements.

Word count: 446 words

Texniki həllərdə S-817B12AMC-CWBT2G tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-817B12AMC-CWBT2G in technical solutions:

  1. Q: What is the S-817B12AMC-CWBT2G? A: The S-817B12AMC-CWBT2G is a voltage detector IC (integrated circuit) manufactured by a specific company.

  2. Q: What is the purpose of the S-817B12AMC-CWBT2G? A: The purpose of this IC is to monitor and detect the voltage level in electronic circuits or systems.

  3. Q: How does the S-817B12AMC-CWBT2G work? A: It works by comparing the input voltage with a fixed reference voltage, and when the input voltage crosses a certain threshold, it triggers an output signal.

  4. Q: What is the operating voltage range of the S-817B12AMC-CWBT2G? A: The operating voltage range is typically between 1.6V and 6.0V.

  5. Q: Can the S-817B12AMC-CWBT2G be used in battery-powered applications? A: Yes, it can be used in battery-powered applications as long as the operating voltage range is within the specified limits.

  6. Q: What is the output type of the S-817B12AMC-CWBT2G? A: The output type is an open-drain configuration, which means it requires an external pull-up resistor to provide a logic-level output.

  7. Q: What is the typical accuracy of the voltage detection in the S-817B12AMC-CWBT2G? A: The typical accuracy is around ±1.0%.

  8. Q: Can the S-817B12AMC-CWBT2G be used for overvoltage protection? A: No, this IC is primarily designed for voltage detection and monitoring, not for overvoltage protection.

  9. Q: Is the S-817B12AMC-CWBT2G suitable for automotive applications? A: Yes, it is suitable for automotive applications as it meets the required standards and has a wide operating temperature range.

  10. Q: Are there any specific precautions to consider when using the S-817B12AMC-CWBT2G? A: It is important to follow the manufacturer's datasheet guidelines regarding input voltage limits, external components, and recommended PCB layout for optimal performance.

Please note that these answers are general and may vary depending on the specific application and requirements.