Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-817B17AMC-CWGT2U
Product Overview
Category
The S-817B17AMC-CWGT2U belongs to the category of voltage regulators.
Use
This product is primarily used for regulating voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short-circuit protection
Package
The S-817B17AMC-CWGT2U comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to provide stable and regulated voltage output, ensuring proper functioning of electronic devices.
Packaging/Quantity
The S-817B17AMC-CWGT2U is typically packaged in reels and is available in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 1.7V
- Output Current: 50mA
- Dropout Voltage: 160mV (typical)
- Quiescent Current: 20µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The S-817B17AMC-CWGT2U has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- High Precision Voltage Regulation: The S-817B17AMC-CWGT2U provides precise voltage regulation, ensuring stable and accurate output voltage.
- Low Dropout Voltage: With a low dropout voltage of only 160mV, this regulator can operate efficiently even when the input voltage is close to the desired output voltage.
- Low Quiescent Current: The low quiescent current of 20µA ensures minimal power consumption when the device is in standby mode.
- Thermal Shutdown Protection: The regulator incorporates thermal shutdown protection, preventing damage due to excessive heat.
- Short-Circuit Protection: In case of a short circuit, the S-817B17AMC-CWGT2U automatically shuts down to protect the circuit and connected devices.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures stable performance of electronic devices.
- Low dropout voltage allows for efficient operation even with low input voltages.
- Low quiescent current minimizes power consumption in standby mode.
- Thermal shutdown and short-circuit protection enhance reliability and safety.
Disadvantages
- Limited output current of 50mA may not be suitable for high-power applications.
- Input voltage range of 2.5V - 6.0V may restrict compatibility with certain circuits.
Working Principles
The S-817B17AMC-CWGT2U operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, regardless of changes in the input voltage or load conditions. This feedback loop ensures stable and regulated voltage output.
Detailed Application Field Plans
The S-817B17AMC-CWGT2U finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment
Detailed and Complete Alternative Models
- S-817B18AMC-CWGT2U: Similar to S-817B17AMC-CWGT2U, but with an output voltage of 1.8V.
- S-817B16AMC-CWGT2U: Similar to S-817B17AMC-CWGT2U, but with an output voltage of 1.6V.
- S-817B15AMC-CWGT2U: Similar to S-817B17AMC-CWGT2U, but with an output voltage of 1.5V.
These alternative models provide similar functionality and characteristics, allowing users to choose the appropriate voltage regulator based on their specific requirements.
(Note: The content provided above is approximately 330 words. Additional information can be added to meet the required word count of 1100 words.)
Texniki həllərdə S-817B17AMC-CWGT2U tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın
Sure! Here are 10 common questions and answers related to the application of S-817B17AMC-CWGT2U in technical solutions:
Q: What is the S-817B17AMC-CWGT2U? A: The S-817B17AMC-CWGT2U is a voltage detector IC (integrated circuit) manufactured by a specific company.
Q: What is the purpose of the S-817B17AMC-CWGT2U? A: The purpose of this IC is to monitor and detect voltage levels in electronic circuits or systems.
Q: How does the S-817B17AMC-CWGT2U work? A: It works by comparing the input voltage with a fixed reference voltage and providing an output signal when the voltage crosses a certain threshold.
Q: What is the operating voltage range of the S-817B17AMC-CWGT2U? A: The operating voltage range of this IC is typically between X volts and Y volts.
Q: Can the S-817B17AMC-CWGT2U be used in automotive applications? A: Yes, it can be used in automotive applications as it is designed to withstand harsh environments and has automotive-grade certifications.
Q: Does the S-817B17AMC-CWGT2U have any built-in protection features? A: Yes, it typically includes features like overvoltage protection, reverse polarity protection, and thermal shutdown.
Q: What is the output configuration of the S-817B17AMC-CWGT2U? A: The output configuration can be either an open-drain or push-pull type, depending on the specific variant.
Q: Can the S-817B17AMC-CWGT2U be used in battery-powered applications? A: Yes, it can be used in battery-powered applications as it has a low quiescent current and operates at low voltages.
Q: Is the S-817B17AMC-CWGT2U compatible with microcontrollers or other digital devices? A: Yes, it is compatible with various digital devices as it provides a logic-level output signal that can be easily interfaced.
Q: Are there any application notes or reference designs available for the S-817B17AMC-CWGT2U? A: Yes, the manufacturer typically provides application notes and reference designs to help users understand and implement the IC effectively.
Please note that the specific details mentioned in the answers may vary depending on the actual specifications and documentation provided by the manufacturer of the S-817B17AMC-CWGT2U.