ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-817B18AMC-CWHT2U
Ətraflı Baxın Məlumat vərəqləri

S-817B18AMC-CWHT2U

Product Overview

Category

The S-817B18AMC-CWHT2U belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • Low power consumption
  • High precision
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

The S-817B18AMC-CWHT2U comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices, ensuring their proper functioning.

Packaging/Quantity

The S-817B18AMC-CWHT2U is typically packaged in reels and is available in quantities of 1000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: 50mA
  • Dropout Voltage: 160mV (typical)
  • Quiescent Current: 20µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The S-817B18AMC-CWHT2U has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: The S-817B18AMC-CWHT2U ensures a stable output voltage regardless of variations in the input voltage.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices from excessive current flow.
  • Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small size allows for easy integration into compact electronic devices.
  • Low power consumption helps conserve energy.
  • High precision ensures accurate voltage regulation.
  • Wide input voltage range makes it compatible with various power sources.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

The S-817B18AMC-CWHT2U operates based on the principle of a linear voltage regulator. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

The S-817B18AMC-CWHT2U finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the S-817B18AMC-CWHT2U include: - S-817A18AMC-CWHT2U - S-817B18AMC-CBYT2U - S-817B18AMC-CFJT2U - S-817B18AMC-CGYT2U

These models have comparable specifications and can be used as alternatives depending on specific requirements.

In conclusion, the S-817B18AMC-CWHT2U is a compact and efficient voltage regulator that provides stable voltage regulation for various electronic devices. Its small size, low power consumption, and high precision make it an ideal choice for many applications. However, its limited output current and dropout voltage should be considered when selecting this product for high-power applications.

Texniki həllərdə S-817B18AMC-CWHT2U tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-817B18AMC-CWHT2U in technical solutions:

  1. Q: What is the S-817B18AMC-CWHT2U? A: The S-817B18AMC-CWHT2U is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of the S-817B18AMC-CWHT2U? A: The operating voltage range of this IC is typically between 1.6V and 6.0V.

  3. Q: How does the S-817B18AMC-CWHT2U detect voltage levels? A: It uses an internal voltage reference and a comparator to monitor the input voltage level.

  4. Q: Can I use the S-817B18AMC-CWHT2U in battery-powered applications? A: Yes, it can be used in battery-powered applications as long as the operating voltage range is within the specified limits.

  5. Q: What is the typical reset voltage threshold of the S-817B18AMC-CWHT2U? A: The typical reset voltage threshold is 1.8V, but it can be adjusted using external resistors.

  6. Q: Does the S-817B18AMC-CWHT2U have any built-in delay for the reset signal? A: No, it does not have a built-in delay. If a delay is required, an external capacitor can be added.

  7. Q: Can I use the S-817B18AMC-CWHT2U to monitor multiple power supply voltages? A: Yes, multiple S-817B18AMC-CWHT2U ICs can be used to monitor different power supply voltages in a system.

  8. Q: Is the S-817B18AMC-CWHT2U suitable for automotive applications? A: Yes, it is designed to meet the requirements of automotive applications and has a wide operating temperature range.

  9. Q: What is the package type of the S-817B18AMC-CWHT2U? A: It comes in a small SOT-23-5 package, which is commonly used for surface-mount applications.

  10. Q: Can I find application circuit examples or reference designs for the S-817B18AMC-CWHT2U? A: Yes, the datasheet of the IC usually includes application circuit examples that can help you get started with your design.

Please note that these answers are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and consult the manufacturer for detailed information.