ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-817B42AMC-CXFT2G
Ətraflı Baxın Məlumat vərəqləri

S-817B42AMC-CXFT2G

Product Overview

Category

The S-817B42AMC-CXFT2G belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Low dropout voltage
  • Low quiescent current
  • High ripple rejection ratio
  • Built-in overcurrent protection
  • Thermal shutdown protection

Package

The S-817B42AMC-CXFT2G comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

The S-817B42AMC-CXFT2G is typically packaged in reels and is available in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.0V to 6.0V
  • Output Voltage: 4.2V
  • Output Current: 50mA
  • Dropout Voltage: 160mV (typical)
  • Quiescent Current: 1.0µA (typical)
  • Ripple Rejection Ratio: 70dB (typical)

Detailed Pin Configuration

The S-817B42AMC-CXFT2G has the following pin configuration:

  1. VIN - Input Voltage
  2. GND - Ground
  3. VOUT - Output Voltage

Functional Features

  • Low dropout voltage ensures efficient power conversion.
  • Low quiescent current minimizes power consumption.
  • High ripple rejection ratio reduces noise in the output voltage.
  • Built-in overcurrent protection safeguards against excessive current flow.
  • Thermal shutdown protection prevents overheating of the device.

Advantages and Disadvantages

Advantages

  • Provides stable and regulated voltage.
  • Compact surface-mount package.
  • Low power consumption.
  • Built-in protection features.

Disadvantages

  • Limited output current capacity.
  • Input voltage range is restricted to 2.0V to 6.0V.

Working Principles

The S-817B42AMC-CXFT2G operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The device compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

The S-817B42AMC-CXFT2G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable audio players - Mobile phones - Digital cameras - Wearable devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the S-817B42AMC-CXFT2G are: - S-817A42AMC-CXFT2G - S-817B33AMC-CXFT2G - S-817B50AMC-CXFT2G - S-817B25AMC-CXFT2G

These models offer similar functionality and characteristics, providing options for different voltage requirements.

Word count: 346 words

Texniki həllərdə S-817B42AMC-CXFT2G tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-817B42AMC-CXFT2G in technical solutions:

  1. Q: What is the S-817B42AMC-CXFT2G? A: The S-817B42AMC-CXFT2G is a voltage detector IC (integrated circuit) manufactured by a specific company.

  2. Q: What is the purpose of the S-817B42AMC-CXFT2G? A: The purpose of this IC is to monitor the voltage level of a power supply and provide an output signal when it falls below a certain threshold.

  3. Q: How does the S-817B42AMC-CXFT2G work? A: It works by comparing the input voltage with a reference voltage internally set within the IC. When the input voltage drops below the reference voltage, it triggers the output signal.

  4. Q: What is the typical operating voltage range for the S-817B42AMC-CXFT2G? A: The typical operating voltage range is from 1.6V to 6.0V.

  5. Q: What is the output type of the S-817B42AMC-CXFT2G? A: The output type is an open-drain output.

  6. Q: What is the maximum current that can be drawn from the output of the S-817B42AMC-CXFT2G? A: The maximum current is typically around 25mA.

  7. Q: Can the S-817B42AMC-CXFT2G be used in battery-powered applications? A: Yes, it can be used in battery-powered applications as long as the operating voltage range is within the specified limits.

  8. Q: Is the S-817B42AMC-CXFT2G suitable for automotive applications? A: Yes, it is suitable for automotive applications as it meets the necessary requirements and standards.

  9. Q: Does the S-817B42AMC-CXFT2G have any built-in protection features? A: Yes, it has built-in overcurrent protection and thermal shutdown features to ensure safe operation.

  10. Q: Can the S-817B42AMC-CXFT2G be used in industrial control systems? A: Yes, it can be used in various industrial control systems where voltage monitoring is required.

Please note that these answers are general and may vary depending on the specific application and requirements.