ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-817B43AMC-CXGT2G
Ətraflı Baxın Məlumat vərəqləri

S-817B43AMC-CXGT2G

Product Overview

Category

The S-817B43AMC-CXGT2G belongs to the category of voltage regulators.

Use

This product is primarily used for voltage regulation in electronic circuits.

Characteristics

  • Low dropout voltage
  • Low quiescent current
  • High ripple rejection ratio
  • Built-in overcurrent protection
  • Thermal shutdown protection

Package

The S-817B43AMC-CXGT2G comes in a small surface-mount package.

Essence

The essence of this product lies in its ability to regulate voltage efficiently and reliably in various electronic applications.

Packaging/Quantity

The S-817B43AMC-CXGT2G is typically packaged in reels and is available in quantities of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.0V to 6.0V
  • Output Voltage: 4.3V
  • Output Current: 50mA
  • Dropout Voltage: 160mV (typical)
  • Quiescent Current: 1.0µA (typical)
  • Ripple Rejection Ratio: 70dB (typical)

Detailed Pin Configuration

The S-817B43AMC-CXGT2G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage ensures efficient voltage regulation even with low input voltages.
  • Low quiescent current minimizes power consumption when the device is in standby mode.
  • High ripple rejection ratio filters out unwanted noise from the input voltage.
  • Built-in overcurrent protection safeguards the circuit from excessive current flow.
  • Thermal shutdown protection prevents the device from overheating.

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • Low power consumption
  • Reliable overcurrent protection
  • Thermal shutdown protection ensures device safety

Disadvantages

  • Limited output current capacity (50mA)

Working Principles

The S-817B43AMC-CXGT2G operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This allows it to maintain a stable output voltage even when the input voltage fluctuates.

Detailed Application Field Plans

The S-817B43AMC-CXGT2G finds applications in various electronic devices, including:

  1. Battery-powered devices
  2. Portable audio players
  3. Mobile phones
  4. Wearable devices
  5. IoT devices

Detailed and Complete Alternative Models

  1. S-817A Series
  2. S-817B Series
  3. S-817C Series
  4. S-817D Series
  5. S-817E Series

These alternative models offer similar functionality and can be considered as alternatives to the S-817B43AMC-CXGT2G.

In conclusion, the S-817B43AMC-CXGT2G is a voltage regulator with excellent characteristics, such as low dropout voltage, low quiescent current, and built-in protection features. Its compact package and wide range of applications make it a versatile choice for various electronic circuits.

Texniki həllərdə S-817B43AMC-CXGT2G tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of S-817B43AMC-CXGT2G in technical solutions:

1. What is the S-817B43AMC-CXGT2G? - The S-817B43AMC-CXGT2G is a voltage detector IC (integrated circuit) manufactured by a specific company.

2. What is the purpose of the S-817B43AMC-CXGT2G? - The purpose of this IC is to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

3. What are the typical applications of the S-817B43AMC-CXGT2G? - This IC is commonly used in various electronic devices, such as battery-powered systems, portable devices, and automotive applications, where monitoring the voltage level is crucial.

4. How does the S-817B43AMC-CXGT2G work? - The IC continuously monitors the input voltage and compares it with a reference voltage internally set. When the input voltage drops below the reference voltage, the IC triggers an output signal.

5. What is the voltage detection range of the S-817B43AMC-CXGT2G? - The voltage detection range of this IC is typically between 2.0V and 6.0V.

6. Can the threshold voltage be adjusted in the S-817B43AMC-CXGT2G? - No, the threshold voltage is fixed and cannot be adjusted externally.

7. What is the output type of the S-817B43AMC-CXGT2G? - The output type of this IC is an open-drain configuration, which requires an external pull-up resistor.

8. What is the output voltage level when the S-817B43AMC-CXGT2G triggers? - When triggered, the output voltage of this IC drops to near ground potential.

9. Is the S-817B43AMC-CXGT2G suitable for automotive applications? - Yes, this IC is designed to meet the requirements of automotive applications and can withstand harsh operating conditions.

10. Can the S-817B43AMC-CXGT2G be used in low-power devices? - Yes, this IC has a low quiescent current consumption, making it suitable for use in low-power devices where power efficiency is important.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer.