ABLIC U.S.A. Inc.
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
S-8330B24FS-T2-G

S-8330B24FS-T2-G

Introduction

The S-8330B24FS-T2-G is a voltage regulator belonging to the category of electronic components. This device is commonly used in various electronic applications to regulate and stabilize voltage levels, ensuring consistent and reliable power supply to sensitive electronic circuits.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Stabilizing and regulating voltage levels in electronic circuits
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: Surface mount package
  • Essence: Ensuring stable and reliable power supply
  • Packaging/Quantity: Typically supplied in reels or tubes containing multiple units

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage: 2.4V
  • Output Current: 300mA
  • Dropout Voltage: 130mV @ 100mA
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The S-8330B24FS-T2-G features a standard 5-pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. EN (Enable)

Functional Features

  • High Precision: Provides accurate and stable output voltage regulation
  • Low Dropout Voltage: Minimizes power loss and improves efficiency
  • Thermal Shutdown Protection: Safeguards the device from overheating

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Compact surface mount package
  • Wide input voltage range

Disadvantages

  • Limited output current capacity
  • Not suitable for high-power applications

Working Principles

The S-8330B24FS-T2-G operates by comparing the output voltage to a reference voltage and adjusting the internal circuitry to maintain a constant output voltage despite changes in input voltage or load conditions. The device utilizes feedback control to achieve precise voltage regulation.

Detailed Application Field Plans

The S-8330B24FS-T2-G is commonly employed in various battery-powered devices, portable electronics, and low-power microcontroller systems where stable voltage supply is critical for proper operation. It is also utilized in sensor modules, IoT devices, and other compact electronic applications.

Detailed and Complete Alternative Models

  • S-8330 Series: Includes various models with different output voltage options
  • S-1317 Series: Low dropout voltage regulators with similar characteristics
  • LM1117 Series: Popular linear voltage regulators with adjustable and fixed output options

In conclusion, the S-8330B24FS-T2-G is a reliable voltage regulator suitable for low-power electronic applications requiring stable and precise voltage regulation.

[Word Count: 411]

Texniki həllərdə S-8330B24FS-T2-G tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is S-8330B24FS-T2-G?

    • S-8330B24FS-T2-G is a high-performance synchronous buck regulator IC designed for use in various technical solutions.

  2. What are the key features of S-8330B24FS-T2-G?

    • The key features include a wide input voltage range, high efficiency, low output voltage ripple, and overcurrent protection.

  3. What is the typical application of S-8330B24FS-T2-G?

    • It is commonly used in applications such as power supplies for industrial equipment, consumer electronics, and automotive systems.

  4. What is the maximum output current of S-8330B24FS-T2-G?

    • The maximum output current is typically around 3A, making it suitable for powering a wide range of devices.

  5. What is the operating frequency of S-8330B24FS-T2-G?

    • The operating frequency is typically in the range of several hundred kHz to a few MHz, depending on the specific application requirements.

  6. Does S-8330B24FS-T2-G have built-in thermal shutdown protection?

    • Yes, it is equipped with thermal shutdown protection to prevent damage from excessive heat.

  7. Can S-8330B24FS-T2-G be used in battery-powered applications?

    • Yes, it is well-suited for battery-powered applications due to its high efficiency and low quiescent current.

  8. What are the recommended input and output capacitors for S-8330B24FS-T2-G?

    • Typically, low ESR ceramic capacitors are recommended for both input and output to ensure stable operation.

  9. Is S-8330B24FS-T2-G compatible with both analog and digital control schemes?

    • Yes, it is compatible with both analog and digital control schemes, providing flexibility in system design.

  10. Where can I find detailed application notes and reference designs for S-8330B24FS-T2-G?

    • Detailed application notes and reference designs can be found in the product datasheet and on the manufacturer's website.