QD
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
AD8691WAUJZ-R7
Ətraflı Baxın Məlumat vərəqləri

AD8691WAUJZ-R7

Product Overview

Category

The AD8691WAUJZ-R7 belongs to the category of operational amplifiers (op-amps).

Use

It is commonly used in various electronic circuits for signal conditioning, filtering, and amplification.

Characteristics

  • High precision
  • Low noise
  • Low offset voltage
  • Wide bandwidth

Package

The AD8691WAUJZ-R7 is available in a small outline package (SOIC) with 8 pins.

Essence

This op-amp is essential for achieving accurate and reliable signal processing in electronic systems.

Packaging/Quantity

The AD8691WAUJZ-R7 is typically packaged in reels containing a specific quantity, such as 2500 units per reel.

Specifications

  • Supply Voltage: ±2.25 V to ±18 V
  • Input Offset Voltage: 50 µV maximum
  • Gain Bandwidth Product: 5 MHz
  • Slew Rate: 3 V/µs
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The pin configuration of the AD8691WAUJZ-R7 is as follows: 1. OUT 2. -IN 3. +IN 4. V- 5. NC 6. V+ 7. NC 8. NC

Functional Features

  • Rail-to-rail output swing
  • Low input bias current
  • Unity-gain stable
  • Overvoltage protection

Advantages and Disadvantages

Advantages

  • High precision and accuracy
  • Wide operating voltage range
  • Low power consumption

Disadvantages

  • Limited output current capability
  • Higher cost compared to general-purpose op-amps

Working Principles

The AD8691WAUJZ-R7 operates based on the principles of differential amplification and feedback control, allowing it to accurately amplify and condition input signals while maintaining stability and linearity.

Detailed Application Field Plans

The AD8691WAUJZ-R7 is well-suited for applications in: - Sensor signal conditioning - Data acquisition systems - Instrumentation amplifiers - Active filters - Precision voltage/current measurement

Detailed and Complete Alternative Models

Some alternative models to the AD8691WAUJZ-R7 include: - AD8628ARZ - AD8676ARMZ - AD8606ARZ

In conclusion, the AD8691WAUJZ-R7 is a high-precision operational amplifier with versatile applications in various electronic systems, offering exceptional performance and reliability.

[Word Count: 334]

Texniki həllərdə AD8691WAUJZ-R7 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the supply voltage range for AD8691WAUJZ-R7?

    • The supply voltage range for AD8691WAUJZ-R7 is 2.7V to 5.5V.

  2. What is the typical input offset voltage of AD8691WAUJZ-R7?

    • The typical input offset voltage of AD8691WAUJZ-R7 is 50µV.

  3. What is the maximum input bias current of AD8691WAUJZ-R7?

    • The maximum input bias current of AD8691WAUJZ-R7 is 10pA.

  4. What is the gain bandwidth product of AD8691WAUJZ-R7?

    • The gain bandwidth product of AD8691WAUJZ-R7 is 5MHz.

  5. What is the typical input noise voltage of AD8691WAUJZ-R7?

    • The typical input noise voltage of AD8691WAUJZ-R7 is 8nV/√Hz.

  6. What is the common-mode rejection ratio (CMRR) of AD8691WAUJZ-R7?

    • The CMRR of AD8691WAUJZ-R7 is typically 114dB.

  7. What is the operating temperature range for AD8691WAUJZ-R7?

    • The operating temperature range for AD8691WAUJZ-R7 is -40°C to +125°C.

  8. Does AD8691WAUJZ-R7 have short-circuit protection?

    • Yes, AD8691WAUJZ-R7 has short-circuit protection.

  9. What is the package type for AD8691WAUJZ-R7?

    • AD8691WAUJZ-R7 is available in a small outline package (SOIC).

  10. Is AD8691WAUJZ-R7 suitable for precision instrumentation and sensor applications?

    • Yes, AD8691WAUJZ-R7 is well-suited for precision instrumentation and sensor applications due to its low offset voltage and low noise characteristics.