Diodes Incorporated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
BZT52C10-7
Ətraflı Baxın Məlumat vərəqləri

BZT52C10-7: Product Overview and Detailed Information

Introduction

The BZT52C10-7 is a semiconductor product belonging to the category of Zener diodes. This component is widely used in electronic circuits for voltage regulation and protection against voltage spikes. Its characteristics, packaging, specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models are detailed below.

Basic Information Overview

  • Category: Zener Diode
  • Use: Voltage regulation and protection against voltage spikes
  • Characteristics: Precise voltage regulation, low leakage current, high reliability
  • Package: SOD-323, SMD/SMT
  • Essence: Semiconductor device for voltage regulation
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies by supplier

Specifications

  • Part Number: BZT52C10-7
  • Voltage - Zener (Nom) (Vz): 10V
  • Power Dissipation (Pd): 300mW
  • Operating Temperature: -65°C to 150°C
  • Zener Tolerance: ±5%
  • Reverse Leakage Current (Ir): 100nA
  • Maximum Impedance (Zzt): 20Ω

Detailed Pin Configuration

The BZT52C10-7 Zener diode has a standard SOD-323 package with two pins. The pinout configuration is as follows: 1. Anode (A) 2. Cathode (K)

Functional Features

  • Voltage Regulation: Maintains a constant output voltage despite variations in input voltage.
  • Voltage Spike Protection: Safeguards sensitive components in a circuit from voltage surges.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Low reverse leakage current
  • Small form factor
  • High reliability

Disadvantages

  • Limited power dissipation capability
  • Sensitivity to temperature variations

Working Principles

The BZT52C10-7 Zener diode operates based on the principle of the Zener effect. When the voltage across its terminals reaches the specified breakdown voltage, it starts conducting in the reverse direction, maintaining a nearly constant voltage drop across it.

Detailed Application Field Plans

The BZT52C10-7 Zener diode finds extensive use in various applications, including: - Voltage regulators in power supplies - Overvoltage protection in electronic circuits - Signal clamping and limiting - Voltage reference circuits

Detailed and Complete Alternative Models

Some alternative models to the BZT52C10-7 Zener diode include: - BZX84C10: Similar 10V Zener diode with SOT-23 package - 1N4740A: 10V Zener diode with axial lead package - MM3Z10VT1G: 10V Zener diode in SOD-323 package

In conclusion, the BZT52C10-7 Zener diode is a crucial component in electronic circuits, providing precise voltage regulation and protection against voltage spikes. Its compact size and reliable performance make it suitable for a wide range of applications.

[Word Count: 443]

Texniki həllərdə BZT52C10-7 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the maximum power dissipation of BZT52C10-7?

    • The maximum power dissipation of BZT52C10-7 is 300mW.

  2. What is the forward voltage drop of BZT52C10-7?

    • The forward voltage drop of BZT52C10-7 is typically 0.9V at a forward current of 10mA.

  3. What is the reverse standoff voltage of BZT52C10-7?

    • The reverse standoff voltage of BZT52C10-7 is 10V.

  4. What is the operating temperature range of BZT52C10-7?

    • The operating temperature range of BZT52C10-7 is -65°C to +150°C.

  5. What is the package type of BZT52C10-7?

    • BZT52C10-7 comes in a SOD-323 surface mount package.

  6. Can BZT52C10-7 be used for voltage regulation in low-power applications?

    • Yes, BZT52C10-7 is suitable for voltage regulation in low-power applications due to its low forward voltage drop and reverse standoff voltage.

  7. Is BZT52C10-7 suitable for use in battery-powered devices?

    • Yes, BZT52C10-7's low power dissipation and small form factor make it suitable for use in battery-powered devices.

  8. What are the typical applications of BZT52C10-7?

    • BZT52C10-7 is commonly used in voltage clamping, overvoltage protection, and voltage regulation circuits.

  9. Does BZT52C10-7 require a heat sink for normal operation?

    • No, BZT52C10-7 does not require a heat sink for normal operation due to its low power dissipation.

  10. What are the key advantages of using BZT52C10-7 in technical solutions?

    • The key advantages of using BZT52C10-7 include its small form factor, low forward voltage drop, and suitability for low-power applications.