Diodes Incorporated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
BZT52C13TQ-7-F
Ətraflı Baxın Məlumat vərəqləri

BZT52C13TQ-7-F: Product Overview and Analysis

Introduction

The BZT52C13TQ-7-F is a component belonging to the category of Zener diodes, which are widely used in electronic circuits for voltage regulation and protection. This entry provides an overview of the basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models of the BZT52C13TQ-7-F.

Basic Information Overview

  • Category: Zener Diode
  • Use: Voltage regulation and protection in electronic circuits
  • Characteristics: Low leakage current, precise voltage regulation
  • Package: SOD-123
  • Essence: Semiconductor device for maintaining a stable voltage across a load
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Voltage - Zener (Nom) (Vz): 13V
  • Power - Max: 500mW
  • Impedance (Max) (Zzt): 20 Ohm
  • Current - Reverse Leakage @ Vr: 100nA @ 10V
  • Operating Temperature: -65°C ~ 150°C

Detailed Pin Configuration

The BZT52C13TQ-7-F has three pins: 1. Anode 2. Cathode 3. Not connected (NC)

Functional Features

  • Precise voltage regulation at 13V
  • Low reverse leakage current
  • Compact SOD-123 package for space-constrained applications

Advantages and Disadvantages

Advantages

  • Accurate voltage regulation
  • Low power dissipation
  • Small form factor

Disadvantages

  • Limited power handling capacity
  • Sensitivity to temperature variations

Working Principles

The BZT52C13TQ-7-F operates based on the Zener effect, where it maintains a constant voltage drop across its terminals when it is reverse-biased. This allows it to regulate the voltage across a load in a circuit.

Detailed Application Field Plans

The BZT52C13TQ-7-F finds extensive use in various electronic devices and systems, including: - Voltage regulators in power supplies - Overvoltage protection circuits - Signal clamping and limiting circuits - Precision voltage references

Detailed and Complete Alternative Models

Some alternative models to the BZT52C13TQ-7-F include: - BZX84C13LT1G - MMBZ5232BLT1G - PZU13B2A,115

In conclusion, the BZT52C13TQ-7-F Zener diode offers precise voltage regulation and protection in a compact package, making it suitable for a wide range of electronic applications.

[Word Count: 398]

Texniki həllərdə BZT52C13TQ-7-F tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the maximum power dissipation of BZT52C13TQ-7-F?

    • The maximum power dissipation of BZT52C13TQ-7-F is 300mW.

  2. What is the forward voltage drop of BZT52C13TQ-7-F?

    • The forward voltage drop of BZT52C13TQ-7-F is typically 0.9V at 10mA.

  3. What is the reverse standoff voltage of BZT52C13TQ-7-F?

    • The reverse standoff voltage of BZT52C13TQ-7-F is 13V.

  4. What is the operating temperature range of BZT52C13TQ-7-F?

    • The operating temperature range of BZT52C13TQ-7-F is -65°C to +150°C.

  5. What is the package type of BZT52C13TQ-7-F?

    • BZT52C13TQ-7-F comes in a SOD-123 package.

  6. What are the typical applications for BZT52C13TQ-7-F?

    • BZT52C13TQ-7-F is commonly used in voltage regulation, overvoltage protection, and signal clamping applications.

  7. What is the reverse leakage current of BZT52C13TQ-7-F?

    • The reverse leakage current of BZT52C13TQ-7-F is typically 0.1µA at its rated voltage.

  8. Is BZT52C13TQ-7-F RoHS compliant?

    • Yes, BZT52C13TQ-7-F is RoHS compliant.

  9. What is the breakdown voltage of BZT52C13TQ-7-F?

    • The breakdown voltage of BZT52C13TQ-7-F is 14.4V minimum.

  10. Can BZT52C13TQ-7-F be used in automotive applications?

    • Yes, BZT52C13TQ-7-F is suitable for use in automotive electronics due to its robust design and wide operating temperature range.