Diodes Incorporated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
PI3CH1010LE
Ətraflı Baxın Məlumat vərəqləri

PI3CH1010LE

Product Overview

Category

The PI3CH1010LE belongs to the category of electronic components.

Use

It is primarily used for signal switching and routing in electronic circuits.

Characteristics

  • High-speed switching capability
  • Low power consumption
  • Compact size
  • Wide operating voltage range

Package

The PI3CH1010LE comes in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of PI3CH1010LE lies in its ability to efficiently control the flow of signals within electronic circuits.

Packaging/Quantity

The product is typically packaged in reels or trays, with a quantity of 2500 units per reel.

Specifications

  • Supply Voltage: 1.65V to 5.5V
  • On-Resistance: 4Ω (typical)
  • Off-Channel Leakage Current: 1nA (maximum)
  • Bandwidth: 2GHz (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PI3CH1010LE has a total of 10 pins, which are configured as follows:

  1. VCC - Power supply input
  2. GND - Ground reference
  3. IN1 - Input control signal 1
  4. IN2 - Input control signal 2
  5. EN - Enable pin for controlling the switch operation
  6. OUT1 - Output channel 1
  7. OUT2 - Output channel 2
  8. NC - No connection
  9. NC - No connection
  10. VCC - Power supply input

Functional Features

  • Bidirectional signal switching
  • Low on-resistance for minimal signal attenuation
  • Fast switching speed for high-speed data transmission
  • ESD protection for enhanced reliability
  • Low power consumption for energy efficiency

Advantages and Disadvantages

Advantages

  • Compact size allows for space-saving designs
  • Wide operating voltage range enables compatibility with various systems
  • High-speed switching capability ensures efficient signal routing
  • Low power consumption contributes to energy-efficient operation

Disadvantages

  • Limited number of output channels (2 in this case)
  • Relatively higher on-resistance compared to some alternative models

Working Principles

The PI3CH1010LE operates based on the principle of MOSFET-based signal switching. When the enable pin (EN) is activated, the input control signals (IN1 and IN2) determine the state of the switch, allowing the signal to pass through either channel 1 (OUT1) or channel 2 (OUT2).

Detailed Application Field Plans

The PI3CH1010LE finds applications in various fields, including:

  1. Communication Systems: Used for signal routing in high-speed data transmission systems.
  2. Consumer Electronics: Enables signal switching in audio/video devices, smartphones, and tablets.
  3. Automotive Electronics: Facilitates signal routing in automotive infotainment systems and control modules.
  4. Industrial Automation: Used for signal switching in industrial control systems and robotics.

Detailed and Complete Alternative Models

  1. PI3CH1020LE: Similar to PI3CH1010LE but offers four output channels instead of two.
  2. PI3CH1030LE: Provides enhanced ESD protection and lower on-resistance compared to PI3CH1010LE.
  3. PI3CH1040LE: Offers wider bandwidth and faster switching speed for high-frequency applications.

These alternative models provide similar functionality to the PI3CH1010LE while offering additional features or improved performance in specific areas.

Word count: 511 words

Texniki həllərdə PI3CH1010LE tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

Sure! Here are 10 common questions and answers related to the application of PI3CH1010LE in technical solutions:

  1. Q: What is PI3CH1010LE? A: PI3CH1010LE is a high-speed, low-power, bidirectional multiplexer/demultiplexer switch designed for use in various technical solutions.

  2. Q: What are the key features of PI3CH1010LE? A: The key features of PI3CH1010LE include low on-resistance, wide voltage range compatibility, high bandwidth, and low power consumption.

  3. Q: What is the typical application of PI3CH1010LE? A: PI3CH1010LE is commonly used in applications such as signal routing, data switching, and bus multiplexing in electronic systems.

  4. Q: What is the voltage range supported by PI3CH1010LE? A: PI3CH1010LE supports a wide voltage range from 1.65V to 5.5V, making it compatible with various digital logic levels.

  5. Q: Can PI3CH1010LE handle high-speed signals? A: Yes, PI3CH1010LE is designed to handle high-speed signals with its high bandwidth capability, making it suitable for applications requiring fast data transfer.

  6. Q: Does PI3CH1010LE support bidirectional signal routing? A: Yes, PI3CH1010LE is a bidirectional switch, allowing signals to be routed in both directions.

  7. Q: How many channels does PI3CH1010LE have? A: PI3CH1010LE has 10 channels, providing multiple options for signal routing and multiplexing.

  8. Q: Is PI3CH1010LE compatible with I2C and SPI protocols? A: Yes, PI3CH1010LE is compatible with various digital communication protocols, including I2C and SPI.

  9. Q: What is the power consumption of PI3CH1010LE? A: PI3CH1010LE has low power consumption, making it suitable for battery-powered devices and energy-efficient applications.

  10. Q: Can PI3CH1010LE be used in automotive applications? A: Yes, PI3CH1010LE is designed to meet automotive-grade requirements, making it suitable for use in automotive electronics.

Please note that these answers are general and may vary depending on specific application requirements.