Diodes Incorporated
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
ZVN4310GTA
Ətraflı Baxın Məlumat vərəqləri

ZVN4310GTA

Product Overview

Category

The ZVN4310GTA belongs to the category of power MOSFETs.

Use

It is commonly used as a switching device in electronic circuits, particularly in power supply and motor control applications.

Characteristics

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate drive power
  • Enhanced ruggedness

Package

The ZVN4310GTA is typically available in a TO-92 package.

Essence

This MOSFET is essential for controlling high-power loads in various electronic systems.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Drain-Source Voltage (VDS): 100V
  • Continuous Drain Current (ID): 1.2A
  • On-Resistance (RDS(on)): 5Ω
  • Power Dissipation (PD): 625mW
  • Gate-Source Voltage (VGS): ±20V
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The ZVN4310GTA has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage capability allows it to handle substantial power loads.
  • Low on-resistance minimizes power loss and heat generation.
  • Fast switching speed enables efficient control of electronic systems.
  • Low gate drive power requirement enhances energy efficiency.

Advantages and Disadvantages

Advantages

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Energy-efficient gate drive

Disadvantages

  • Limited continuous drain current compared to some alternative models
  • Moderate operating temperature range

Working Principles

The ZVN4310GTA operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

Power Supply Systems

The ZVN4310GTA can be used in power supply circuits to efficiently switch high currents and voltages, contributing to the overall stability and performance of the system.

Motor Control

In motor control applications, this MOSFET can effectively regulate the power supplied to motors, enabling precise speed and direction control.

LED Lighting

Its fast switching speed makes it suitable for LED lighting systems, ensuring rapid and accurate adjustments in brightness levels.

Detailed and Complete Alternative Models

  • IRF530N
  • FQP30N06L
  • IRL540N
  • STP55NF06L

These alternative models offer similar characteristics and are compatible with many of the same applications as the ZVN4310GTA.

In conclusion, the ZVN4310GTA is a versatile power MOSFET with high voltage capability, low on-resistance, and fast switching speed, making it suitable for various electronic applications such as power supplies, motor control, and LED lighting systems.

[Word count: 409]

Texniki həllərdə ZVN4310GTA tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is the ZVN4310GTA used for?

    • The ZVN4310GTA is a high voltage N-channel MOSFET commonly used in switching applications and power management circuits.

  2. What is the maximum drain-source voltage of the ZVN4310GTA?

    • The maximum drain-source voltage of the ZVN4310GTA is 100V, making it suitable for various high voltage applications.

  3. What is the typical on-state resistance of the ZVN4310GTA?

    • The typical on-state resistance of the ZVN4310GTA is around 4 ohms, allowing for efficient power handling.

  4. Can the ZVN4310GTA be used for low power applications?

    • Yes, the ZVN4310GTA can be used for low power applications due to its ability to handle lower currents effectively.

  5. Is the ZVN4310GTA suitable for use in automotive electronics?

    • Yes, the ZVN4310GTA is suitable for use in automotive electronics due to its high voltage capability and robust design.

  6. What are the typical applications of the ZVN4310GTA?

    • Typical applications of the ZVN4310GTA include power supplies, motor control, LED lighting, and other high voltage switching circuits.

  7. Does the ZVN4310GTA require a heat sink for high power applications?

    • For high power applications, it is recommended to use a heat sink with the ZVN4310GTA to ensure proper thermal management.

  8. What is the maximum continuous drain current of the ZVN4310GTA?

    • The maximum continuous drain current of the ZVN4310GTA is approximately 1.2A, making it suitable for moderate power applications.

  9. Can the ZVN4310GTA be used in audio amplifier circuits?

    • Yes, the ZVN4310GTA can be used in audio amplifier circuits, especially in applications requiring high voltage handling.

  10. Are there any specific considerations for driving the ZVN4310GTA in a circuit?

    • When driving the ZVN4310GTA, it's important to consider gate drive voltage, gate capacitance, and ensuring proper voltage and current levels for reliable operation.