Eaton
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
BK1/S506-12.5-R
Ətraflı Baxın Məlumat vərəqləri

BK1/S506-12.5-R

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage
Package: SOT-23
Essence: Regulates voltage to a stable level
Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Input Voltage: 2.5V to 12V
  • Output Voltage: 1.2V to 6V
  • Dropout Voltage: 190mV at 150mA
  • Output Current: 150mA
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. GND (Ground)
  2. VOUT (Output Voltage)
  3. VIN (Input Voltage)

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse battery protection

Advantages

  • High precision output
  • Small package size
  • Wide input voltage range

Disadvantages

  • Limited output current
  • Restricted operating temperature range

Working Principles

The BK1/S506-12.5-R is a voltage regulator that maintains a stable output voltage even when the input voltage fluctuates. It achieves this by using a feedback mechanism to adjust the output voltage based on the input and reference voltages.

Detailed Application Field Plans

The BK1/S506-12.5-R is suitable for various battery-powered applications, such as portable devices, IoT sensors, and handheld instruments. It can also be used in automotive electronics, power management systems, and industrial control equipment.

Detailed and Complete Alternative Models

  • LM2937-3.3
  • MCP1702-3302E

This entry provides comprehensive information about the BK1/S506-12.5-R, including its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Texniki həllərdə BK1/S506-12.5-R tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. What is BK1/S506-12.5-R?

    • BK1/S506-12.5-R is a specific type of material or component used in technical solutions, known for its high durability and heat resistance.

  2. Where is BK1/S506-12.5-R commonly used?

    • BK1/S506-12.5-R is commonly used in industrial applications such as aerospace, automotive, and manufacturing due to its ability to withstand high temperatures and harsh conditions.

  3. What are the key properties of BK1/S506-12.5-R?

    • The key properties of BK1/S506-12.5-R include high tensile strength, excellent thermal stability, corrosion resistance, and low thermal expansion.

  4. How does BK1/S506-12.5-R compare to other similar materials?

    • Compared to other materials, BK1/S506-12.5-R offers superior performance in high-temperature environments and has better mechanical properties, making it ideal for demanding technical solutions.

  5. What are the recommended operating temperatures for BK1/S506-12.5-R?

    • The recommended operating temperatures for BK1/S506-12.5-R typically range from -50°C to 500°C, making it suitable for a wide range of technical applications.

  6. Can BK1/S506-12.5-R be machined or formed into specific shapes?

    • Yes, BK1/S506-12.5-R can be machined and formed using standard metalworking techniques, allowing for customization to fit specific technical solution requirements.

  7. Are there any special handling or storage considerations for BK1/S506-12.5-R?

    • It is important to store BK1/S506-12.5-R in a dry and controlled environment to prevent moisture absorption and degradation of its properties. Handling should be done with care to avoid damage to the material's surface.

  8. What are the typical applications where BK1/S506-12.5-R excels?

    • BK1/S506-12.5-R excels in applications such as engine components, exhaust systems, high-temperature sensors, and thermal insulation due to its exceptional heat resistance and durability.

  9. Is BK1/S506-12.5-R compatible with other materials and coatings?

    • BK1/S506-12.5-R is compatible with various coatings and can be bonded to other materials using appropriate adhesives, expanding its versatility in technical solutions.

  10. What are the best practices for integrating BK1/S506-12.5-R into technical solutions?

    • Best practices include thorough testing for compatibility, proper surface preparation, and following manufacturer guidelines for fabrication and installation to ensure optimal performance and longevity.