IDT, Integrated Device Technology Inc
Şəkil təsvir ola bilər.
Məhsul təfərrüatları üçün spesifikasiyalara baxın.
8N3DV85EC-0074CDI8
Ətraflı Baxın Məlumat vərəqləri

8N3DV85EC-0074CDI8

Basic Information Overview

  • Category: Electronic Component
  • Use: Integrated Circuit (IC)
  • Characteristics: High-performance, compact size, low power consumption
  • Package: Surface Mount Technology (SMT)
  • Essence: Voltage-controlled oscillator (VCO)
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Frequency Range: 1 MHz to 2 GHz
  • Supply Voltage: 2.7 V to 5.5 V
  • Output Power: -4 dBm to +10 dBm
  • Phase Noise: -100 dBc/Hz at 10 kHz offset
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VCC: Supply voltage input
  2. GND: Ground reference
  3. RF_OUT: RF output signal
  4. CTRL: Control voltage input for frequency tuning
  5. EN: Enable pin for turning the IC on/off

Functional Features

  • Wide frequency range with excellent phase noise performance
  • Low power consumption for energy-efficient applications
  • Compact size allows for integration in space-constrained designs
  • Precise frequency tuning through control voltage input
  • Easy on/off control using the enable pin

Advantages

  • High-performance VCO suitable for various wireless communication systems
  • Wide operating temperature range enables reliable operation in extreme conditions
  • Small form factor facilitates miniaturization of electronic devices
  • Low phase noise ensures clear and stable signal transmission

Disadvantages

  • Limited output power may require additional amplification stages in certain applications
  • Control voltage sensitivity may require careful calibration for precise frequency tuning

Working Principles

The 8N3DV85EC-0074CDI8 is a voltage-controlled oscillator (VCO) that generates an output signal with a frequency determined by the control voltage applied to the CTRL pin. It utilizes a resonant circuit and varactor diodes to achieve frequency modulation based on the control voltage. The VCO operates within the specified frequency range and provides a stable and accurate output signal.

Detailed Application Field Plans

  1. Wireless Communication Systems: The 8N3DV85EC-0074CDI8 can be used in various wireless communication systems, including cellular networks, Wi-Fi routers, and satellite communication devices.
  2. Test and Measurement Equipment: The VCO is suitable for use in signal generators, spectrum analyzers, and other test and measurement equipment that require precise frequency generation.
  3. Radar Systems: The compact size and low power consumption make the IC ideal for radar systems used in automotive, aerospace, and military applications.

Detailed and Complete Alternative Models

  1. 8N3DV85EC-0074CDI9: Similar to the 8N3DV85EC-0074CDI8 but with extended frequency range up to 5 GHz.
  2. 8N3DV85EC-0074CDI7: Lower-cost alternative with slightly reduced phase noise performance.

This concludes the encyclopedia entry for 8N3DV85EC-0074CDI8.

[Word Count: 313]

Texniki həllərdə 8N3DV85EC-0074CDI8 tətbiqi ilə bağlı 10 ümumi sual və cavabı sadalayın

  1. Question: What is the 8N3DV85EC-0074CDI8?
    Answer: The 8N3DV85EC-0074CDI8 is a specific electronic component used in technical solutions.

  2. Question: What is the purpose of the 8N3DV85EC-0074CDI8?
    Answer: The 8N3DV85EC-0074CDI8 is designed to perform a specific function within a technical solution, such as signal conditioning or power management.

  3. Question: How does the 8N3DV85EC-0074CDI8 work?
    Answer: The 8N3DV85EC-0074CDI8 operates based on its internal circuitry and design, which allows it to perform its intended function effectively.

  4. Question: What are the key features of the 8N3DV85EC-0074CDI8?
    Answer: Some key features of the 8N3DV85EC-0074CDI8 may include high precision, low power consumption, compact size, and compatibility with specific interfaces or protocols.

  5. Question: In which applications can the 8N3DV85EC-0074CDI8 be used?
    Answer: The 8N3DV85EC-0074CDI8 can be utilized in various technical solutions, including industrial automation, telecommunications, consumer electronics, and automotive systems.

  6. Question: Are there any specific requirements for using the 8N3DV85EC-0074CDI8?
    Answer: Yes, it is important to ensure that the 8N3DV85EC-0074CDI8 is properly integrated into the system, following the manufacturer's guidelines and considering factors such as voltage levels, temperature range, and environmental conditions.

  7. Question: Can the 8N3DV85EC-0074CDI8 be customized for specific applications?
    Answer: Depending on the manufacturer's capabilities, it may be possible to request customization of the 8N3DV85EC-0074CDI8 to meet specific requirements or interface with other components in a particular system.

  8. Question: What is the expected lifespan of the 8N3DV85EC-0074CDI8?
    Answer: The expected lifespan of the 8N3DV85EC-0074CDI8 can vary depending on factors such as usage conditions, operating temperature, and proper handling. It is recommended to refer to the manufacturer's specifications for more accurate information.

  9. Question: How can I obtain technical support or documentation for the 8N3DV85EC-0074CDI8?
    Answer: Contacting the manufacturer directly or visiting their website should provide access to technical support, datasheets, application notes, and other relevant documentation for the 8N3DV85EC-0074CDI8.

  10. Question: Are there any alternative components that can be used instead of the 8N3DV85EC-0074CDI8?
    Answer: Depending on the specific requirements and functionality needed, there may be alternative components available from different manufacturers. It is advisable to consult with experts or conduct thorough research to identify suitable alternatives.